33"Insa turbo
- Thread starter mnc
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Camshaft
New Member
- Posts
- 111
im running 265x75xR16 on discovery freestyle alloys and they catch the radius arms at full lock and are abit close to the exhaust at the back end but they just clear. Were looking out for some wheel spacers so the wheels wont hit the radius arms!! But they will look awesome ours do! Cheers Joe
discomania
Well-Known Member
- Posts
- 6,947
Why don't you just adjust the lock stops?
There are bolts with a tube spacer, washers or sometimes a lock nut just to the side of the swivel housing which can be screwed out a bit so that the steering lock is not as tight and stops rubbing on the radius arms.
There are bolts with a tube spacer, washers or sometimes a lock nut just to the side of the swivel housing which can be screwed out a bit so that the steering lock is not as tight and stops rubbing on the radius arms.
yella
New Member
- Posts
- 15,991
what did you expect????
discomania
Well-Known Member
- Posts
- 6,947
You need to get longer HT bolts then.
Spacers are iffy.
Spacers are iffy.
