Disco 1 300 TDI Manifold Gasket

White_Disco

Active Member

Posts

119

Location

Polegate,East Sussex

• Aug 28, 2015

• #1

Hi Guys, I think the manifold gasket is leaking on my 300TDI, I have the new gasket, but need some advice on which way round the gasket goes. Which side goes on the engine block? Many Thanks

 

wammers

No longer with us, RIP

Donater

Posts

58,170

Location

Preston Lancs.

• Aug 28, 2015

• #2

Top photo to head.

 

White_Disco

Active Member

Posts

119

Location

Polegate,East Sussex

• Aug 28, 2015

• #3

Thanks Wammers, I'll get working on it.

 

wammers

No longer with us, RIP

Donater

Posts

58,170

Location

Preston Lancs.

• Aug 28, 2015

• #4

White_Disco said:

Thanks Wammers, I'll get working on it.

Click to expand...

In case answer was a bit vague The face on the top photo goes to head. Bottom photo is what you should see when it is fitted but other way up.

 

markSX

Active Member

Posts

969

Location

Heathrow

• Aug 28, 2015

• #5

Check the exhaust manifold, I changed two gasket's on mine before I found that the face of the center ports on the manifold was rusting and not flat.
A quick going over with the sander and it's been fine since.

 

White_Disco

Active Member

Posts

119

Location

Polegate,East Sussex

• Aug 30, 2015

• #6

Thanks for your advice guys. I've just finished the job, turns out the garage that did the head gasket had put the manifold gasket on back to front. Some of the stud bolts were finger tight, all back together now, I can hear and feel the turbo working now!