300 TDi Cam belt change
- Thread starter Disco Inferno
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Disco Inferno
New Member
- Posts
- 470
- Location
- In my house
Where is he? and how do I find him?? Could you post a link from ebay on here so I can just click???
Sirus
Your all Banned except me
- Posts
- 22,196
- Location
- The Country of Black
search mobile land rover servicing on ebay
bordonladdie
Member
- Posts
- 20
I've just changed the belt on my 1997 Disco. Working singlehandedly it took me 10 hours. This job requires patience, douple/triple checking and unless you have a photographic memory,marking everything. I made my own engine locking tool, out of a section of 2 inch hollow square steel with short lengths of 3/8 id pipe welded to the four corners to correspond with the four threaded holes in the crankshaft pulley,and addind a 24 inch handle. The crankshaft pulley bolt is torqued high and locktited, requiring some extra leverage to get it loose. I had access to a 5:1 Torque Multiplier and was able to loosened and final -tightened this bolt using a 32 mm combination spanner via the Torque Multiplier.
Glad you hafe got it done.
Similar threads
