peter john
New Member
- Posts
- 8
my frelander t,c abs hilldecent lights come on when i am driving but not all the time stop and starte engine up and it goes off againe eny tips
3 lights on
- Thread starter peter john
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
eightinavee
Well-Known Member
- Posts
- 3,956
- Location
- UK.
Dont eat yellow snow.
Optimus Prime
Well-Known Member
- Posts
- 5,988
- Location
- Garden of England
do a search for 3 amigos as they are known, common fault
peter john
New Member
- Posts
- 8
thanks for your help will try a new switch
peter john
New Member
- Posts
- 8
i think i know what you mean thanks
eightinavee
Well-Known Member
- Posts
- 3,956
- Location
- UK.
Rather than mess around throwing parts at it,why dont you get it on Testbook and have the codes read - you'll need it to clear them anyway.Wabco abs codes are accurate so unlikely to lead you the wrong way.
john t
Active Member
- Posts
- 680
- Location
- basingstoke
and how much would they ripp you off ?
hd lights, is a common fault, usually the switch on the brake pedle, or the wiring next to the gear lever,
avoid the stealers at all costs ,
eightinavee
Well-Known Member
- Posts
- 3,956
- Location
- UK.
Of course its a well known fact that brake pedal switch is the only reason ever for the three lights to come on.The HDC switch wires breaking dont put the lights on it just prevents it from working.
About £30 seems average to have the codes read.
john t
Active Member
- Posts
- 680
- Location
- basingstoke
depends on your aproach to owning a freelander or any landrover for that matter,
i prefer to fix the problems myself, rather than get someone else to do it , and the main point of this forum is self help i do belive ,
if people are not interested or capable in trying to have a go at sorting the problem then they would run to the dealer in the first place
just my opinion
i prefer to fix the problems myself, rather than get someone else to do it , and the main point of this forum is self help i do belive ,
if people are not interested or capable in trying to have a go at sorting the problem then they would run to the dealer in the first place
just my opinion
peter john
New Member
- Posts
- 8
hi thanks for you help the problem is now solved i hope pulled plunger down a bit and it havent come back on since i will try it out for a weak if it works i order a new switch thanks for your help
Similar threads
