sooperjoolz
Member
- Posts
- 10
- Location
- Bedfordshire
Hi all,
I wonder if someone can assist?
I bought a Freelander Commercial that has been semi converted to 5 seats. I'm primarily attempting to do 2 things at the moment.
1. Create a shopping list of the plastic panels I need for the rear from a proper 3 door (This has the commercial plastics that have just been cut back. not only does it look like half a job the sharp edges are probably lethal)
2. I have a softback and I would like to see where the hood retaining brackets fit (somewhere near the the rear window actuator from what I've seen).
It would be really helpful if someone could post a couple of decent resolution photo's to give me an idea.
Ideally this should be the left hand side right hand side and then one square on looking into the back with the door open. This would be great.
I've compiled a list of all the parts required to do this so along with the instructions in the RAVE I think I can post a pretty informative howto on this once it's done.
Thanks in advance
I wonder if someone can assist?
I bought a Freelander Commercial that has been semi converted to 5 seats. I'm primarily attempting to do 2 things at the moment.
1. Create a shopping list of the plastic panels I need for the rear from a proper 3 door (This has the commercial plastics that have just been cut back. not only does it look like half a job the sharp edges are probably lethal)
2. I have a softback and I would like to see where the hood retaining brackets fit (somewhere near the the rear window actuator from what I've seen).
It would be really helpful if someone could post a couple of decent resolution photo's to give me an idea.
Ideally this should be the left hand side right hand side and then one square on looking into the back with the door open. This would be great.
I've compiled a list of all the parts required to do this so along with the instructions in the RAVE I think I can post a pretty informative howto on this once it's done.
Thanks in advance