2WD back to 4WD

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
S

samh93

New Member
Posts
13
Location
Humberside
Hey guys. Had my 2001 Freelander for 8 months now and I love it to bits. I recently took it in for an MOT and it passed with flying colours. The only problem is someone in the past had turned it into a 2WD. It still runs great but I'm looking to start off-roading and need it to be a 4x4. I'm just wondering what systems am I needing to replace and how much will it cost me to buy them. My brother in laws a mechanic so he'll install them for me. I know its hard to say without seeing the car.
Everything's still installed minus the rear prop shaft. Do people generally remove the prop shaft just in case or is it because the VCU has failed?.

Thanks guys

Sam
 
Some people remove the prop to try and improve fuel consumption (or use that as an excuse :rolleyes:) but as you say its much more likely that the VCU has failed or the IRD. 1st step is to source a rear prop, fit it then test your VCU and take it from there :)
 
Which bit yer got missing? VCU arrowed. Props front and rear yellow dot.

8e4Dw2n.jpg

vcutest 8e4Dw2n
 
Last edited:
It's only the rear prop shaft that's gone. Everything else is still there. If the VCU is still attached d'you reckon it's still usable?

Sam
 
I wouldn't risk it but a short mile or do will show of its a VCU or IRD problem that made the previous owner change it. £300 for a recon VCU fitted from Bell Engineering and a breaker for the prop.
 
You must log in or register to reply here.

Similar threads

S
2WD conversion
Replies
12
Views
752
Alibro
Alibro
Atomician
Fl1 with selectable 4wd?
Replies
2
Views
307
GrumpyGel
GrumpyGel
Zorro587
Noise gone but prop shaft queries abound
Replies
14
Views
1K
Chris_68
C
K
Help - 4WD issue !!
Replies
7
Views
718
Nodge68
Nodge68
B
Back to 4x4 Questions
Replies
7
Views
1K
waxer
W
Back
Top