24 spline diff??
- Thread starter Danny.
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Trewey
Cockernee, Pasty munchin bastid.
- Posts
- 20,088
- Location
- Kernow - Near England
If yours is original, it'll be 10 spline.
You can fit the 24 spline, if you get the matching half shafts and drive members.
You can fit the 24 spline, if you get the matching half shafts and drive members.
Trewey
Cockernee, Pasty munchin bastid.
- Posts
- 20,088
- Location
- Kernow - Near England
If it's a decent LSD, it's worth it.
If yer can't be bothered, just send the diff to me!
If yer can't be bothered, just send the diff to me!
Trewey
Cockernee, Pasty munchin bastid.
- Posts
- 20,088
- Location
- Kernow - Near England
That'll go for a lot more money than the current bid!
mark 4x4
Active Member
- Posts
- 379
- Location
- nottingham uk
just had a bid and iam winning lol
vivnap
Banned
- Posts
- 2,610
- Location
- south normanton
me mate sells 24 spline diffs for £60 and 10 spline diffs for £50. they are all good diffs. he also has quite a few PAS boxes + other disco parts if ya looking for one 
mark 4x4
Active Member
- Posts
- 379
- Location
- nottingham uk
i do need a good 24 spline, is he up your way ?me mate sells 24 spline diffs for £60 and 10 spline diffs for £50. they are all good diffs. he also has quite a few PAS boxes + other disco parts if ya looking for one
vivnap
Banned
- Posts
- 2,610
- Location
- south normanton
hes a mile or so from junction 27 on the M1. about ten mins drive from my house.
mark 4x4
Active Member
- Posts
- 379
- Location
- nottingham uk
not that shop up your way then ?
vivnap
Banned
- Posts
- 2,610
- Location
- south normanton
? what shop is that ?
a chop shop
na its a mate who used to do a lot of trialing he now breaks a few land rovers and sells mostly to the people who still go to land rover trials/off roading
mark 4x4
Active Member
- Posts
- 379
- Location
- nottingham uk
? what shop is that ?
a chop shop
na its a mate who used to do a lot of trialing he now breaks a few land rovers and sells mostly to the people who still go to land rover trials/off roading
chop shop ! tonks ! lol its not danny is it, near ikea ?
mark 4x4
Active Member
- Posts
- 379
- Location
- nottingham uk
give us a bell or text if pos as i do need one, numbers 07973539352 cheers
vivnap
Banned
- Posts
- 2,610
- Location
- south normanton
tonks ? f*ckin tonks ? not on your nelly !
expensive place that and def not a place i would use after seeing a defender that only used tonks for the repairs servicing but i wont go into that on a forum !
mark 4x4
Active Member
- Posts
- 379
- Location
- nottingham uk
well yes i won the limited slip diff !
meet me in a layby just off A1 J37 at seven, so off up to other side of doncaster i went and it wasnt a LSD after all !
didnt think he knew that it wasnt, but still had to point out the pinion gears inside and no clutch plates.
well atleast i won it and not someone who wouldnt of noticed as someone already had !
well wasted £20 of diesel and a hour and a half :frown:
meet me in a layby just off A1 J37 at seven, so off up to other side of doncaster i went and it wasnt a LSD after all !
didnt think he knew that it wasnt, but still had to point out the pinion gears inside and no clutch plates.
well atleast i won it and not someone who wouldnt of noticed as someone already had !
well wasted £20 of diesel and a hour and a half :frown:
kingsonlim
New Member
- Posts
- 523
- Location
- West Yorkshire
not intending to add salt on the wound.........good thing I didn't win it as I stopped when it went past 150 quid.....otherwise, it would be time and diesel wasted on my side...
I've got a 1989 Defender 110 2.5TD and am hoping that someone can tell me what sort of axles i have. I would like to buy a ARB diff locker, but i have no idea if i have a 10 or 24 spline shaft or if it is a Salisbury axle. I looked in my Haynes manual, but nothing there.
Could someone please post what years/models are 10 spline, 24 spline, and Salisbury .
Could someone please post what years/models are 10 spline, 24 spline, and Salisbury .
Last edited:
bmp42
Active Member
- Posts
- 658
- Location
- Coimbra, Portugal
front axle as long as its still original will be a 10 spline diff and shafts, rear axle will be a Salisbury with drum brakes
