Berty boy 1968 lwb
Well-Known Member
- Posts
- 113
- Location
- EARTH
My dad had the patriot , 2.5... heavy rifle thou great balance
22 air rifle
- Thread starter gemsdad
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Berty boy 1968 lwb
Well-Known Member
- Posts
- 113
- Location
- EARTH
Used too go lamping with the lurchers , love a rabbit stew mmmmmmmmmmmm
BikerB
Well-Known Member
- Posts
- 6,313
- Location
- Far up North
I don't now have any 308/7.62mm stuff, I shoot 7.62R which is the old Russian Rimmed round for the Mosins. I have a couple of them including a proper Enemy at the Gates type Sniper. However the carbine is probably the most fun. The 15" folding bayonet freaks out some of the more conservative target shooters and the short barrel means a huge bang and a 4ft long muzzle flash when it goes off which make everyone jumpyup, the .303" was a great round, also the 7.62mm that followed
However accuracy is pretty poor, both the carbines I have would be hard pressed to hit anything, you would actually be easier going down the range and using them as clubs if you wanted to put a hole in the paper with some degree of confidence
Coffeelandy
Well-Known Member
- Posts
- 2,297
- Location
- SE Cornwall (forgotten part!)
Geddon Gem been a while. I have a .22 you can use, but it's probably cheaper to just buy one local rather than trek down to Kernow.
gemsdad
NOT BOTHERED.
- Posts
- 67,807
- Location
- halfway between here and there.
Ayeup matey,great to hear from you again,i thought you had been swept out to sea or summat,lol.
doriz
Well-Known Member
- Posts
- 17,312
How’s the coffee business?
gemsdad
NOT BOTHERED.
- Posts
- 67,807
- Location
- halfway between here and there.
Bean slow.
Coffeelandy
Well-Known Member
- Posts
- 2,297
- Location
- SE Cornwall (forgotten part!)
Pretty good in between lockdowns, just spent 3 grand on the chassis, same old crap, new rear cross etc.
Coffeelandy
Well-Known Member
- Posts
- 2,297
- Location
- SE Cornwall (forgotten part!)
Nah back on it Mate glad there's some old faces on here still, how's you?Bean slow.
doriz
Well-Known Member
- Posts
- 17,312
Just do with a proper drip pour.
gemsdad
NOT BOTHERED.
- Posts
- 67,807
- Location
- halfway between here and there.
Hi,not doing too bad mate,i hope your business really goes well this year.What exactly have you had done to the landy?.
Coffeelandy
Well-Known Member
- Posts
- 2,297
- Location
- SE Cornwall (forgotten part!)
New rear cross member, load of welding, suspension, bushes, hoses, radius arms, ball joints etc.
gemsdad
NOT BOTHERED.
- Posts
- 67,807
- Location
- halfway between here and there.
cool,well i hope this season is very profitable for you to help pay for all the work.
