L322 2012 L322 Front/Rear washers

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
R

railtruck

New Member
Posts
3
According to the manual, you pull the stalk to operate front and press end to operate rear washers. The front washers work ok but when I press stalk the front washers operate instead of rear.

Has anyone had this issue? Is it a problem with the BCU software?
 
Thanks for all of your help. I misread the manual, seemed odd to have two ways to do the same thing, and had just had BCU changed so jumped to the wrong conclusion. Tried the proper way and I can hear pump but no fluid comes out should be an easy fix.
 
railtruck said:
Thanks for all of your help. I misread the manual, seemed odd to have two ways to do the same thing, and had just had BCU changed so jumped to the wrong conclusion. Tried the proper way and I can hear pump but no fluid comes out should be an easy fix.
Click to expand...

Unless the pipe has come off and you have to fish it out ...
 
railtruck said:
Thanks for all of your help. I misread the manual, seemed odd to have two ways to do the same thing, and had just had BCU changed so jumped to the wrong conclusion. Tried the proper way and I can hear pump but no fluid comes out should be an easy fix.
Click to expand...
They do the same thing but not quite. Button gives an 'autowash' , as in it squirts water and operates wipes. Pulling stalking to you squirts water, but then you must operate the wipers. This allows for those pain in the bum patches that sometimes get missed to have water run down and over, so that on operation of wipers, they are cleaned.
 
kermit_rr said:
On mine (2012) they both do the same thing. Maybe it can be set in the CCF
Click to expand...
I would have to double check what a prolonged pull does but on mine a quick pull/release just squirts water and then need to do up or down on stalk for wiper. Button push gives a squirt of water and measured number of wipes. It does seem redundant for both motions to do the same thing though.
 
Mostly a pull on mine does a squirt and wipe but occasionally it does just squirt so needs an up or down motion :)
Maybe it depends if it's on the auto wipe setting which mine usually is.
 
You must log in or register to reply here.

Similar threads

J
90 300tdi screen washers not working
Replies
2
Views
281
JoeyDigz
J
T
Defender 90 Rear Shock Fitting issue
Replies
3
Views
220
Anaconda
A
S
Electrical Gremlins L/ Rear Tail / Number Plate / Central Locking
Replies
1
Views
212
sierrafery
sierrafery
Flat 6
Order of hard top corner fixings
Replies
1
Views
509
dag019
dag019
T
Fan Clutch??
Replies
14
Views
976
Grrrrrr
Grrrrrr
Back
Top