Series 3 200tdi into my series 3, engine mounting brackets

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Richicardo

Richicardo

Member
Posts
12
Location
Wilmslow
How do people,

Following on from my previous post Re a 200tdi into my series. I've now got my 200tdi engine but need the mounting brackets that go on the engine to mount it to the chassis. Any ideas where I get them from?!!

Ta very much
Richard
 
If you are changing from a 2.25 then use the ones off the present engine. Have you read Glencoynes web page ? Modified defender mounts are sometimes used.
 
Use the standard 2.25 petrol/diesel mounts with either standard petrol rubber mounts or defender mounts. I used slightly larger petrol mounts on mine. Glencoyne is good lots of information if you just search '200tdi into series Land Rover' in Google
 
divie said:
If you are changing from a 2.25 then use the ones off the present engine. Have you read Glencoynes web page ? Modified defender mounts are sometimes used.
Click to expand...
Hi

I'm changing from a rover v8! Only had a brief read of Glencoynes Web page. Will have a better look now.
Cheers
Richard
 
Just a quick question on this conversion, would I be correct in saying that the 200Tdi would be one of the best upgrades to the Series machines??

Sorry for hi-jacking the thread??
 
You must log in or register to reply here.

Similar threads

P
Is it worth swapping out my worn 2.25 D for a 2.5 D
2
Replies
21
Views
1K
Pezer
P
DeanDS
Series 3 SWB 200TDI cambelt change
Replies
6
Views
869
lynall
L
W
Land Rover series 3 Daihatsu diesel
Replies
8
Views
757
tottot
tottot
D
200Tdi (Discovery) into a '79 88" S3
2
Replies
22
Views
3K
Wildefalcon
W
T
SIII swb88 '72 Rear engine/gearbox mounts seriously out of alignment
Replies
11
Views
996
tottot
tottot
Back
Top