200tdi gearbox

adrian82 · Sep 22, 2013

hi all I've got a 200 tdi gearbox out of a disco and was wondering would in go striate into my 200tdi defender

jamesmartin · Sep 22, 2013

no its longer and has gear stick at the rear of box not front like defender ,but people do fit them after some modification

adrian82 · Sep 22, 2013

ok cheers for that I take it the transfer box is not the same aswell

jamesmartin · Sep 22, 2013

it will fit but high gear is slightly taller better for motorway not so for towing heavy loads, to fit it you need to swap hand brake cable assembly from your box to it ,require 2 8mm holes tapping in rear of speedo housing

adrian82 · Sep 22, 2013

thanks fort that very helpful

swarf · Sep 23, 2013

adrian82 said:
hi all I've got a 200 tdi gearbox out of a disco and was wondering would in go striate into my 200tdi defender

I am replying because you have the gearbox allready and presumably want to use it?.The Disco gear box has a bell housing 5.5" longer than the defenders. The output shaft is 5.5" longer as well. I used a disco engine and a modified gearbox in mt series3. It can be made to fit and if you are interested in some more details I can respond by private message only. Chris.

blue beasty · Sep 23, 2013

swarf said:
I am replying because you have the gearbox allready and presumably want to use it?.The Disco gear box has a bell housing 5.5" longer than the defenders. The output shaft is 5.5" longer as well. I used a disco engine and a modified gearbox in mt series3. It can be made to fit and if you are interested in some more details I can respond by private message only. Chris.

Why by PM only? :suspicious:

200tdi gearbox

adrian82

Active Member

jamesmartin

Well-Known Member

adrian82

Active Member

jamesmartin

Well-Known Member

adrian82

Active Member

swarf

Member

blue beasty

Leaks an prone to bits dropping off

Similar threads