turrican
Well-Known Member
- Posts
- 277
So i've searched many threads regarding using an engine stand but most threads now have broken images.
I've read that you can attach the engine to the stand using the holes where the bell housing studs are. So i can remove 4 studs like the one pointed to in the picture, they seem to have a depth of about 25mm. Use some high tensile M10 bolts that are 25mm + depth of stand hole.
Is this really enough to support the engine?
Also my stand has a max weight 680kg, so that should be ok.
Any advice much appreciated.
I've read that you can attach the engine to the stand using the holes where the bell housing studs are. So i can remove 4 studs like the one pointed to in the picture, they seem to have a depth of about 25mm. Use some high tensile M10 bolts that are 25mm + depth of stand hole.
Is this really enough to support the engine?
Also my stand has a max weight 680kg, so that should be ok.
Any advice much appreciated.