2006 l322 cranks but won't start

J

jockus

New Member

Posts

8

• Jul 31, 2022

• #1

2006 l322 vogue 3.0 td. ok guys...i'm sure you've been asked this one before, i switch on ignition this works, i have no ignition lights no gauges work, i can crank it over, again no lights or any gauges and it wont fire ..

any help greatly appreciated..

regard.. Jockus

 

backinblack

Well-Known Member

Full Member

Posts

6,169

Location

North Manchester

• Jul 31, 2022

• #2

How old is your battery?
Is it flat?
Have you had it on diagnostics?

 

J

jockus

New Member

Posts

8

• Jul 31, 2022

• #3

backinblack said:

How old is your battery?
Is it flat?
Have you had it on diagnostics?

Click to expand...

battery new ybx5000

 

J

jockus

New Member

Posts

8

• Jul 31, 2022

• #4

jockus said:

battery new ybx5000

Click to expand...

no not on diag yet

 

backinblack

Well-Known Member

Full Member

Posts

6,169

Location

North Manchester

• Jul 31, 2022

• #5

jockus said:

battery new ybx5000

Click to expand...

Which variant? there seems to be a lot under that number. Most on here recommend an MF31-1000 as the Vogue needs a lot of electrickery.
Is it fully charged? i.e over 12.6v

 

J

jockus

New Member

Posts

8

• Aug 1, 2022

• #6

jockus said:

no not on diag yet

Click to expand...

 

J

jockus

New Member

Posts

8

• Aug 1, 2022

• #7

battery sitting at 13.6v

 

Datatek

Well-Known Member

Posts

44,891

Location

Near Poitiers SW France

• Aug 1, 2022

• #8

jockus said:

battery sitting at 13.6v

Click to expand...

Is that with the engine running? Within half an hour of switching off the engine or charger you should see about 12.8 volts not 13.6

 

J

jockus

New Member

Posts

8

• Aug 1, 2022

• #9

try reading the the post..engine cranks wont fire!!

 

Datatek

Well-Known Member

Posts

44,891

Location

Near Poitiers SW France

• Aug 1, 2022

• #10

jockus said:

try reading the the post..engine cranks wont fire!!

Click to expand...

Ooops So you should not have 13.6 volts unless you have a charger connected.

 

backinblack

Well-Known Member

Full Member

Posts

6,169

Location

North Manchester

• Aug 1, 2022

• #11

I'd suggest diags is needed.

 

J

jockus

New Member

Posts

8

• Aug 1, 2022

• #12

i did have charger connected....

 

backinblack

Well-Known Member

Full Member

Posts

6,169

Location

North Manchester

• Aug 1, 2022

• #13

Back to @Datatek post #8, disconnect charger and check voltage after 1/2 hour but if you have no dash or gauges even with the charger connected I'd say you deffo need diags.
I guess you've checked all the fuses?
Also you could try the self test to see if the dash works in test mode, See the last post in here by the Saint

https://www.landyzone.co.uk/land-ro...tem-has-any-body-got-one.351644/#post-4682062