L322 2005 rear wiper plastic gear

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

backinblack

Well-Known Member
Full Member
Posts
6,165
Location
North Manchester
The plastic gear has stripped on my rear wiper motor and the the only one I can find online is £11 + £14pp, anyone know where I can get a reasonably priced one please? the only ones I can find have the wrong magnet fitting.

Cheers

Brian

upload_2022-10-29_19-39-6.png
 
is there any "way" of installing the gear in a certain position after re-assembling it ? I've took mine apart, regressed it, and now it won't work anymore. I also tried trying the motor without the "linkage arm" installed, and it works for a few seconds, then stops. I also feel the motor is getting really really hot . Does the motor have a constant load on it for some reason ? Any thoughts ?
 
The motor spindle runs in a bush not a bearing so if when the spindle rusts it starts to bind in the bush. ooh er missus
The wiper ECU will sense the increased load and turn the motor off until the ignition is cycled off and on, ask me how I know :)

View attachment 287701
Could try shaving the bush, know what I mean wink wink;)🪒🪒
 
There are SO many interchangeable BMW- RR parts, they are invariably much cheaper as was the case with the Jacking points I purchased. £23 each and £28 postage for RR or £14 each of Amazon with free postage
 
Back
Top