2004 td5 misfire

D

dhep72

New Member

Posts

3

• Jul 12, 2023

• #1

Location: scotland Posts: 3

Td5 misfire​ ​ Hi my 2004 td5 has started with a cold start misfire with white smoke if you start it and let it tick over its fine or give it lots of throttle its fine is seen to be just above tick over to about 2000 rpm have change the injector loom,glow plugs and cleaned all oil from the red plug, replaced the crank sensor, also changed the injector seals with genuine , the only fault code is 160 can error fault active. Any help on were to look next would be appreciated.

 

JUKE179r

Well-Known Member

Posts

3,166

Location

Suffolkshire

• Jul 12, 2023

• #2

Fault code 160?
Try using a Land Rover specific diagnostic tool to read/clear fault codes.

 

tom1979

Well-Known Member

Full Member

Posts

2,141

Location

East of England, UK

• Jul 13, 2023

• #3

Most generic fault code readers will not work with the Td5 engine.

 

D

dhep72

New Member

Posts

3

• Jul 17, 2023

• #4

Hi have now tested with a better scan tool and there is still a can fault

 

marjon

Well-Known Member

Full Member

Posts

16,729

Location

Bulgaria

• Jul 17, 2023

• #5

dhep72 said:

Hi have now tested with a better scan tool and there is still a can fault

Click to expand...

I am no expert, but what reader and what was the actual code, then peeps maybe able to help better.

J

 

Discodevon

Well-Known Member

Posts

1,448

• Jul 17, 2023

• #6

Cleaning injector socket does that mean it was dirty?

 

lightning

Well-Known Member

Posts

4,156

Location

High Peak

• Aug 6, 2023

• #7

Had the same issue with ours.

Try replacing the injector harness.