Sylvester
Member
- Posts
- 79
- Location
- Los Angeles, California
My keys turns and the car starts, but the key will not come out of the ignition when car is turned off. please advise.
2004 M62 HSE Petro, key stuck in ignition
- Thread starter Sylvester
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
holidaychicken
Well-Known Member
- Posts
- 4,014
- Location
- Kent
It will only release the key if you are in park, does the P show up in the dash display?
Sylvester
Member
- Posts
- 79
- Location
- Los Angeles, California
It's in park. It could be my steering column, ignition or the shift lever is not releasing the key in park. any other ideas.
holidaychicken
Well-Known Member
- Posts
- 4,014
- Location
- Kent
If it is showing P in the dash then you could try the link below to the competition.
it could be steering column although that normally prevents the key turning on rather than coming out as far as i know and could be the barrel itself as you have already pointed out
http://www.fullfatrr.com/wiki/Key_stuck_in_ignition
it could be steering column although that normally prevents the key turning on rather than coming out as far as i know and could be the barrel itself as you have already pointed out
http://www.fullfatrr.com/wiki/Key_stuck_in_ignition
gold rover
Well-Known Member
- Posts
- 10,240
- Location
- dùthaich Dhè fèin
I had a similar issue in my Volvo. Turned out it was the little , push button thing on the gear stick ( you know the thing /_\ ) wasn't releasing properly. So although it was showing P, it wasn't releasing the key. I had to pull the button out manually each time.
No harm in giving it a jiggle,see if it works.
No harm in giving it a jiggle,see if it works.
Sylvester
Member
- Posts
- 79
- Location
- Los Angeles, California
Thanks
davidsmith1307
Well-Known Member
- Posts
- 1,333
- Location
- Hull
Any luck?
M12TNN
New Member
- Posts
- 1
- Location
- Newtownhamilton / Newry
I had the same problem in my 03 rr , if you lift the surround on gear stick(should clip out) carefully there's a little black bar that should knock down when you turn off ignition in park. A drop of WD40 or equivalent spray in lift bar manually a few times should be grand. Sorry for my macanical jargon. Hope this helps.
Sylvester
Member
- Posts
- 79
- Location
- Los Angeles, California
ok Thanks
tomcat59alan
Well-Known Member
- Posts
- 18,611
- Location
- wirral and triquivijate
Sylvester
Member
- Posts
- 79
- Location
- Los Angeles, California
There was a dime that got down there that restricted the movement of the lever.
- Posts
- 68,233
- Location
- The Wooly Witch
That could have been more expensive ....
holidaychicken
Well-Known Member
- Posts
- 4,014
- Location
- Kent
That has to be a first, actually making money out of fixing your own range rover
brianp38dse
Well-Known Member
- Posts
- 20,065
- Location
- heathrow
It is nice when its any easy fix, and one that pays for itself is even better, thanks for letting everyone know for the future.
Similar threads
