the murfster
Member
- Posts
- 49
- Location
- tamworth
Hope so I'm going to grind the locking ring off tommorow order a new onethen see what happens,luckily i have me old military 110 to use.
2004 defender 90 td5 fuel pump location
- Thread starter Qtrtd5
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
- Posts
- 7,949
- Location
- East Midlands
The little tabs on the white ring are supposed to go in notches on the top of the tank - or at least mine do - and stop it turning, but yours don't seem to have worked! Back in 2012 when i was trying to cure a fuel leak I got a new white ring for mine. I don't recall it being very much. I chiselled the tabs off the old one so it would unscrew.
the murfster
Member
- Posts
- 49
- Location
- tamworth
Hi Brown
Ihave screwed it back on it dosent go on as far lining up the tabs but i think it will be far enough,soon find out when the locking ring arrives.
Ihave screwed it back on it dosent go on as far lining up the tabs but i think it will be far enough,soon find out when the locking ring arrives.
the murfster
Member
- Posts
- 49
- Location
- tamworth
Update
New locking ring arrived ,thanks Ian irb.
Pipework fitted elec plug back on,tight and in place.
Still no reading on the fuelguage,got a 12 volt feed to the guage & 6.7 volts to the sender unit.
Found a bodge fix with insulation tape but it got too dark before i could do a proper join,but just moving this wire gave me reading of half a tank, do a proper join tommorow see what the result is.
So half a fix so far.
New locking ring arrived ,thanks Ian irb.
Pipework fitted elec plug back on,tight and in place.
Still no reading on the fuelguage,got a 12 volt feed to the guage & 6.7 volts to the sender unit.
Found a bodge fix with insulation tape but it got too dark before i could do a proper join,but just moving this wire gave me reading of half a tank, do a proper join tommorow see what the result is.
So half a fix so far.
the murfster
Member
- Posts
- 49
- Location
- tamworth
Gauge working earthing seems to have been the problem,hopefully.
Thanks for your advice
Thanks for your advice
