xpuser8334
Active Member
- Posts
- 471
- Location
- Nottinghamshire
Hi All.
Quick Question.
I'm replacing the Engine in the TD4 with a good engine from a Rover 75 CDTI.
I have changed:-
Turbo
Injectors & wring harness
Wiring Loom
Steel Coolant Pipes
EGR Blank fitted.
I've even cleared all of the threads on the back of the engine block with a "Threading" Tap....
But.....
The alternator is different, so... I took the 75 alternator off as the connector is a different shape, then I tried offering the Freebie Alternator up..... are these usually tight, or do I need to swap the Air Con Pump mounting bracket AND the PAS pump???? or should it all fit.
Thanks In adv. guys... really need some help here.
Quick Question.
I'm replacing the Engine in the TD4 with a good engine from a Rover 75 CDTI.
I have changed:-
Turbo
Injectors & wring harness
Wiring Loom
Steel Coolant Pipes
EGR Blank fitted.
I've even cleared all of the threads on the back of the engine block with a "Threading" Tap....
But.....
The alternator is different, so... I took the 75 alternator off as the connector is a different shape, then I tried offering the Freebie Alternator up..... are these usually tight, or do I need to swap the Air Con Pump mounting bracket AND the PAS pump???? or should it all fit.
Thanks In adv. guys... really need some help here.