2003 Freelander engine code help!!!!

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
I found that the issue is the input speed sensor. Looking online for the part but can't find one that is sure match. Does anyone know the part number for it?
 
cr1543 said:
I found that the issue is the input speed sensor. Looking online for the part but can't find one that is sure match. Does anyone know the part number for it?
Click to expand...


Also quick question. Do you mind sharing how you found out it was the vehicle speed sensor so other night learn from this ?
 
I had to eventually take it to a local shop who cleared all codes that was caused by the diff mount. They then drove it until the fault code was back and showed as input speed sensor. This is the only shop in my area that has experience with land rover so he seamed to know what he was talking about.
 
cr1543 said:
I had to eventually take it to a local shop who cleared all codes that was caused by the diff mount. They then drove it until the fault code was back and showed as input speed sensor. This is the only shop in my area that has experience with land rover so he seamed to know what he was talking about.
Click to expand...

What was the exact code given?

Was it:
P0720 Vehicle speed sensor
 
I was going to try it myself. Does anyone have a diagram of where this sensor is located and how to replace it?
 
Last edited:
zefrench said:
VIS motors have nothing to do with the transmission


Regarding the transmission:
I would use a multi-meter and test the solenoid as first step. Post your results:

See this video
https://www.youtube.com/watch?v=VTmdkDuKZ6A
Click to expand...

Just outta curiosity, is this the same hippo from this forum.
I met a guy in Winnipeg who was a rover tech in the UK (not sure how credible he was but seemed to know my car somewhat) that told me about the Jatco solenoids failing. Im having some possible tranny issues that happen occasionally, would that be a constant hard shifting or could he be correct that the odd lock up and release while driving may be from failing solenoids. Is this a tough job? Tranny drop involved?
 
You must log in or register to reply here.

Similar threads

P
Stuttering - cut out - cranks but won't start
Replies
1
Views
637
Arctic2
Arctic2
A
FACELIFT Freelander 2005 outer front CV joint - specialized ?
2
Replies
25
Views
2K
Arnodafe72
A
E
Freelander 2 2011 SD4 code P2263 pending and wheezing sound
Replies
0
Views
1K
Elmarkio
E
S
Fl 2 Engine Failure
2
Replies
38
Views
5K
coltron1
C
C
FL2 Engine Stopped While Driving - Dropped Valve, Engine Swap
9 10 11
Replies
211
Views
19K
CaptainB
C
Back
Top