200 tdi 1993 no side lights hazzards horn c/l

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

m1hgv

Member
Posts
35
Location
picardie northern france
hi all
my disco is giving me more grief than the ex wife
all was well till i flashed headlamps at a mate of mine then all the side lights headlamps hazzards horn and central locking stopped working
the alarm stopped working also .
the engine starts wipers indicators brake lights intierior lights all work
but if i try to start the engine withe sides on or horn or hazarrds or door open or horn pressed starter doesnt work it just clicks from one of the yellow relays behind the plastic a panel in rh footwell
apart from a gallon of petrol and a match anyone have any other ideas i just spent 4 hrs cleaning all earth leads and and as many conections as i could find and its still the same

hope some one can help before i do somthin stupid :confused::confused::confused::confused::confused:
 
hi all
my disco is giving me more grief than the ex wife
all was well till i flashed headlamps at a mate of mine then all the side lights headlamps hazzards horn and central locking stopped working
the alarm stopped working also .
the engine starts wipers indicators brake lights intierior lights all work
but if i try to start the engine withe sides on or horn or hazarrds or door open or horn pressed starter doesnt work it just clicks from one of the yellow relays behind the plastic a panel in rh footwell
apart from a gallon of petrol and a match anyone have any other ideas i just spent 4 hrs cleaning all earth leads and and as many conections as i could find and its still the same

hope some one can help before i do somthin stupid :confused::confused::confused::confused::confused:

if the fusible links are ok replace the lighting stalk that has the hazard switch in it.
 
ok thanks fellas did all that but its still the same no sides heads hazards horn central locking or alarm this all started cos her indoors flashed headlamps at her mate and ping it all went dark i have disconected all the blocks i could find and cleaned the conections they wernt to bad i disconnected the 12v/70amp black block on lhf bulkhead next to all the wiring plugs and cleaned it that was in a bit of a state spades all green but made no difference checked the lights and stuff to see if it changed ouwt starter doesnt work while its disconnected so i assume it works the solenoid???? removed cleaned and greased all the earth straps i could find battery to chassis via inner wing chassis to starter bolt little farty fiddly one under windscreen now run out of ideas
 
ok thanks fellas did all that but its still the same no sides heads hazards horn central locking or alarm this all started cos her indoors flashed headlamps at her mate and ping it all went dark i have disconected all the blocks i could find and cleaned the conections they wernt to bad i disconnected the 12v/70amp black block on lhf bulkhead next to all the wiring plugs and cleaned it that was in a bit of a state spades all green but made no difference checked the lights and stuff to see if it changed ouwt starter doesnt work while its disconnected so i assume it works the solenoid???? removed cleaned and greased all the earth straps i could find battery to chassis via inner wing chassis to starter bolt little farty fiddly one under windscreen now run out of ideas

Have you replaced the light stalks. I had the exact same thing and it was the light switch stalk?
 
Have you replaced the light stalks. I had the exact same thing and it was the light switch stalk?
no i havent im in france so i will have to find one or wait till end of month till i come over to uk luckily i dont need to use it its just annoying cos indicators work but the rest on that stalk doesnt and there is no power to the fuse box on those fuses is the stalk before or after the fuses? downloaded rave cd3 but its only for 95 on and mines a 93 i will try un plugin the stalk and test for current at the plug i will post the results later cheers redhand
 
:praise:
thanks guys managed to find the _àè-(_è&-&è__è fusible links 3 out of the 4 were shot the 4th had already been re done this now means i have to weld the hole in the inner wing to try and stop the water gettin in there should be fine i wrapped them in insulation tape then some of that nast wax tape that gets every where for brass joints cheers guys thanks for your help didnt even know fusible links existed
 
Back
Top