2 week 110 restoration project - will I mange it!

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
jacktw said:
Mmmmmmm.........
Really torn.... Whilst the chassis is stripped down. Should I get it galvanized?...
Click to expand...

Jonnygearbox said:
Yes but then etch prime it and paint it :)
Click to expand...

No no no! never!

If you galv dip a chassis that is not clean then your just locking the rot inside and thats not a good move.

Ive spoken to a couple of people/companies now and there advise is to just get a new one.

Also if you don't get the galv inside the chassis spread evenly and it pools you will be charged a fortune. Most places charge by weight so if its all in the corners and not evenly spread then it isn't being effective and its costing you a lot of money to be in effective.

just my 2 pence worth.
 
Done the same on mine, galvanised chassis change thread, mine is a brand new chassis then galvanised, obviously all the metal was fresh and clean inside and out, not really sure if the galvanising will work inside an old chassis as there will be rust/rot on the inside
 
lee3022 said:
Done the same on mine, galvanised chassis change thread, mine is a brand new chassis then galvanised, obviously all the metal was fresh and clean inside and out, not really sure if the galvanising will work inside an old chassis as there will be rust/rot on the inside
Click to expand...

There you go.

I honestly haven't looked, what is the price difference between a new galv and a non galv?
 
GINGE said:
No no no! never!

If you galv dip a chassis that is not clean then your just locking the rot inside and thats not a good move.

Ive spoken to a couple of people/companies now and there advise is to just get a new one.

Also if you don't get the galv inside the chassis spread evenly and it pools you will be charged a fortune. Most places charge by weight so if its all in the corners and not evenly spread then it isn't being effective and its costing you a lot of money to be in effective.

just my 2 pence worth.
Click to expand...

Thanks, I've decided against it! Plus the girlfriend is getting annoyed with the time it's in the garden :)
 
0C29955C-AFC7-457A-9F75-03DB851F5543-1003-000000A842BE974A_zps04822a75.jpg
 
FF967BCC-06E4-4F86-9FE8-EA313815583F-2976-0000022F055C91D0_zps9a59c3f4.jpg


No it's not snowing in Hampshire!, that would be the leftover soda, from soda blasting the bits the wire wheel couldn't get too!
 
You must log in or register to reply here.

Similar threads

H
Building the dream 110
Replies
16
Views
2K
shaynecm
S
L
Landy 110 1992 (J368 XSG) - is it as bad as mechanic says..
2 3
Replies
44
Views
4K
tottot
tottot
dag019
Fitting YRM extended second row floor upstand
Replies
14
Views
619
dag019
dag019
iamdimitris
Hello from Cyprus.
Replies
8
Views
374
saxavordian
saxavordian
dag019
Hypothetical project feasibility
Replies
17
Views
2K
FlyingPete
FlyingPete
Back
Top