P38A 2 Things - Diag and where to find this door piece

Ruthlessgk · Nov 13, 2015

Hey Up Everyone,

Got a few things i need to find out -

1 - What is the white part of this called and can i get a replacement as passenger door is not opening. The Right Angle part of the cable keeps slipping out..

2 - I have the Book Symbol on my HEVAC unit. Anyone in the Sheffield area can do a diag for me?
Willing to share crunchy nut for the task

Cheerz in Advance

Zaff

wammers · Nov 13, 2015

Plastic retainer looks ok. Are you pushing it down into retaining hole properly. If it's loose, clip in then squeeze top up a little to close retainer.

tomcat59alan · Nov 13, 2015

wammers said:
Plastic retainer looks ok. Are you pushing it down into retaining hole properly. If it's loose, clip in then squeeze top up a little to close retainer.

Bit like a young virgin then.

N2O · Nov 13, 2015

Bend that cable end a little bit inwards and forget about it. Had this happening in all door handles. It's a result of trying to open locked door from inside by puling handle using too much force.

biketeacherdave · Nov 13, 2015

You won't find any one with diag to read the hevac except textbook??? Main dealer only so start looking at the how to guides to track down the problem

wammers · Nov 13, 2015

biketeacherdave said:
You won't find any one with diag to read the hevac except textbook??? Main dealer only so start looking at the how to guides to track down the problem

Nanocom can read, test functions and reset Hevac.

wammers · Nov 13, 2015

tomcat59alan said:
Bit like a young virgin then.

You have a dirty mind Alan. But yeah a bit like that if you push it in far enough it's less likely to pop out.

Zorro587 · Nov 14, 2015

Odyssey has a GEMS-engined P38 and a Nanocom. Try him. Thoroughly nice bloke, though I reckon you'll have to come over to Chesterfield cos I think his is a bit poorly too at the moment.

odyssey · Nov 14, 2015

Sadly, Nige is correct, RR is currently immobilised with HG probs, but I do have Nanocom and if you can make it over, you're welcome to plug it in if yours is Gems. Don't know if the hevac diag will work on other flavours. What's it not doing?
Alastair

tomcat59alan · Nov 14, 2015

wammers said:
You have a dirty mind Alan. But yeah a bit like that if you push it in far enough it's less likely to pop out.

You mean a good memory Tony, I remember the days I had to wrap the virgins in cling film in case they burst.

wammers · Nov 14, 2015

tomcat59alan said:
You mean a good memory Tony, I remember the days I had to wrap the virgins in cling film in case they burst.

Ruthlessgk · Nov 17, 2015

Lol Thanks for the offer. I will have to have a drive down one day soon.
I will get the door fixed soon just been a bit busy recently. (Its already been nearly a year but as i always drive it doesnt bother me lol)
Mine is a 97 Diseasel. Will your Nanocom still work?

wammers · Nov 17, 2015

Ruthlessgk said:
Lol Thanks for the offer. I will have to have a drive down one day soon.
I will get the door fixed soon just been a bit busy recently. (Its already been nearly a year but as i always drive it doesnt bother me lol)
Mine is a 97 Diseasel. Will your Nanocom still work?

A GEMS Nanocom will not work on the diesel.

martyuk · Nov 17, 2015

Nanocom will still work as far as I know - it's only the engine ECU that the you won't be able to read and need the additional licence for, all the other modules are interchangeable, you could even
hook up to the Nanocom in the GEMS section - it doesn't check what engine ECU is installed unless you are trying to connect to the engine ECU.

wammers · Nov 17, 2015

martyuk said:
Nanocom will still work as far as I know - it's only the engine ECU that the you won't be able to read and need the additional licence for, all the other modules are interchangeable, you could even
hook up to the Nanocom in the GEMS section - it doesn't check what engine ECU is installed unless you are trying to connect to the engine ECU.

OK never tried it so will have to take your word for it.

martyuk · Nov 17, 2015

I'm sure I hooked up to GEMS and EDC models on mine when I just had the Thor ECU licence, before I unlocked it for all models. There are 4 P38 licences codes you can enter - one for each engine management system, and the fourth for all the other modules.

P38A 2 Things - Diag and where to find this door piece

Ruthlessgk

Active Member

wammers

No longer with us, RIP

tomcat59alan

Well-Known Member

N2O

Active Member

biketeacherdave

Well-Known Member

wammers

No longer with us, RIP

wammers

No longer with us, RIP

Zorro587

Active Member

odyssey

Active Member

tomcat59alan

Well-Known Member

wammers

No longer with us, RIP

Ruthlessgk

Active Member

wammers

No longer with us, RIP

martyuk

Well-Known Member

wammers

No longer with us, RIP

martyuk

Well-Known Member

Similar threads