2" lift on my 90

Adam1979 · Dec 29, 2011

Is it possible to lift a 90 2" without changing any other parts (longer brake lines or anything else) or could this lead to problems?? It has been converted to discs on the back if this makes any difference?? And are pro comp shocks any good or is there a better alternative for about the same cash??

Many thanks

Adam

The Mad Hat Man · Dec 29, 2011

http://www.landyzone.co.uk/lz/f38/thinking-lifting-your-landy-read-first-66840.html

Adam1979 · Dec 29, 2011

Thanks mate. Think I will stick with medium load standard height after reading that.

Regards

Adam

red-september · Dec 30, 2011

Ends up costing well over the odds in bent and sheared parts after!

Have a look round on ebay, for Radius arms and lower link joints etc.. etc.. that already compensate for the 2" lift.. if ya wait long enough youl get all the bits ya need for a good enough price..
maybe this time next year you might have the full lot to fit.

saxokid18 · Dec 30, 2011

its expensive to do the propper lift kit but for the last year i have run about on standard spring used 2inch spacer blocks and 2 inchrear shocks and been thru a set of props and a new set of radius arm bushes set and its not cheap .. on my new build i have gone to the expense of doing the lot and came out around £1600 for suspention and correction arms plus the relocation cones and props etc but in theory it should drive spot on

wiltshire landyman · Dec 31, 2011

Adam1979 said:
Thanks mate. Think I will stick with medium load standard height after reading that.

Regards

Adam

i wouldnt take that as gospel mate,most people dont have issues after a lift its only the odd few,which may suggest that they have worn out parts before the lift.

go with whatever lift you want

wiltshire landyman · Dec 31, 2011

red-september said:
Ends up costing well over the odds in bent and sheared parts after!

Have a look round on ebay, for Radius arms and lower link joints etc.. etc.. that already compensate for the 2" lift.. if ya wait long enough youl get all the bits ya need for a good enough price..
maybe this time next year you might have the full lot to fit.

have never had any bent or sheared parts on any of the landys ive had lifted

wickford90 · Dec 31, 2011

As above. Had my lift on about 3 years with no adverse affects on other parts.

gunny7 · Dec 31, 2011

Yep, no problems here either.

Prop started rumbling a bit so fitted a double cardan and cured it.

888crewcab · Dec 31, 2011

Mine has been lifted for a few yrs now and no problems at all..

puffin1 · Dec 31, 2011

no problems on my 300tdi 90 with a 2" lift.

sible88 · Dec 31, 2011

2"lift and NO problem at all

2" lift on my 90

Adam1979

New Member

The Mad Hat Man

Well-Known Member

Adam1979

New Member

red-september

Active Member

saxokid18

New Member

wiltshire landyman

I’m back

wiltshire landyman

I’m back

wickford90

Well-Known Member

gunny7

New Member

888crewcab

New Member

puffin1

Active Member

sible88

New Member

Similar threads