2-door reference measurments

Does anyone have reference dimensions / measurements for the body of a 2-door?

I'm going to be repairing the body on my old tub soon and want to brace the A & B pillars; the first things I need to repair are the sills (completely rotted), the rear cross-member (75% rotted) and the bottoms of the A & B pillars (95% flaky brown-ness) so I'm somewhat concerned as to whether the body will distort or indeed if it has distorted already.

If anybody has photos and / or an idiot's guide to said measurements it would be most appreciated and definitely worth an IOU pint!

if the doors still fit ok then all one needs to do is weld in some angle or box across pillers..also good to weld in across from n/s to o/s to keep from bowing in/out..
just tack them in and chop out after..
the a pillers want to bow inwards if you dont do this..
so angle across from a piller n/s to o/s and on b pillers..and across from n/s a to b piller and of course same on o/s..if feeling paranoid then brace diagonal as well..do this with doors closed from inside..

Thanks zen, must admit I hadn't even thought about sticking the doors back on!