Tunelessblues
New Member
- Posts
- 191
I beend driving round our local Industrial estate but am still waiting to be able to tax it.
Its seems really slow to me at the moment, but then i am use to driving a 280BHP GT4 so is to be expected i suppose.
2.8 td Daihatsu into 110
- Thread starter peters877
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
I beend driving round our local Industrial estate but am still waiting to be able to tax it.
Its seems really slow to me at the moment, but then i am use to driving a 280BHP GT4 so is to be expected i suppose.
Sorry to resurrect an old thread..
Did you have any issues with the Spigot bearing for the gearbox? (what parts did you need)
I have a Daihatsu in a a RR Classic 1983 (Ex V8) The timing belt snapped So have purchased a replacement engine to go in, all going well and fine until the spigot bearings, Cant get the original daihatsu spigot out (new engine) (have resorted to drilling it out, And now can't get what looks like a sleeve for the brass spigot out (from the original engine), (The Brass popped right out with the Hydrolic Grease meathod.)
Any help would be greatly appreciated after 4 hours of playing with them............
Did you have any issues with the Spigot bearing for the gearbox? (what parts did you need)
I have a Daihatsu in a a RR Classic 1983 (Ex V8) The timing belt snapped
So have purchased a replacement engine to go in, all going well and fine until the spigot bearings, Cant get the original daihatsu spigot out (new engine) (have resorted to drilling it out, And now can't get what looks like a sleeve for the brass spigot out (from the original engine), (The Brass popped right out with the Hydrolic Grease meathod.) Any help would be greatly appreciated after 4 hours of playing with them............
Shifty1962
Well-Known Member
- Posts
- 4,209
- Location
- The Winchester Club - Englandshire
Get a local engineering works to turn you one up. If you know somebody with a lathe its half an hours work at the most.
Tunelessblues
New Member
- Posts
- 191
Sorry to resurrect an old thread..
Did you have any issues with the Spigot bearing for the gearbox? (what parts did you need)
I have a Daihatsu in a a RR Classic 1983 (Ex V8) The timing belt snapped
Any help would be greatly appreciated after 4 hours of playing with them............
The guys that do the Daihatsu conversion kit, will supply you a New spigot bush for £25+VAT i think.
Conversion & Precision Engineering Ltd On:
07583 127 355 or 07583 085 983
My Daihatsu engine had a proper bearing in for the spigot, i removed it and knocked a bronze one up down my mates machine shop.
I think it was some thing like, 32 o,d 22 i,d and 10mm thick.
Tunelessblues
New Member
- Posts
- 191
Cheers, Just waiting for Snail mail to deliver it in the post.......
fieldman39
New Member
- Posts
- 4
Hi how do I wire up the little black box on the fuel pump that has three connectors thanks for help in anticipation
Tunelessblues
New Member
- Posts
- 191
You only need the one wire out of the 3 to open the stop solenoid!
Fender Frog 42
New Member
- Posts
- 1
- Location
- Melksham, Wiltshire.
Hi,
Great thread, has helped answer loads of questions.
I've got an E reg 110 with a DL - 52 lump in it (was a V8 apparently).
Just a few questions:
Which lump did you have in it originally?
How does she drive now, speed, pull, mpg etc?
Did you ramp up fuel and boost?
And lastly where did you get and what type (size) is your intercooler?
Sorry for all the questions but, thanks in advance for any answers.
Great thread, has helped answer loads of questions.
I've got an E reg 110 with a DL - 52 lump in it (was a V8 apparently).
Just a few questions:
Which lump did you have in it originally?
How does she drive now, speed, pull, mpg etc?
Did you ramp up fuel and boost?
And lastly where did you get and what type (size) is your intercooler?
Sorry for all the questions but, thanks in advance for any answers.
