2.5 td 19j oil leak from oil filter housing

foxy333 · Aug 21, 2013

Hi,,can anyone tell me how easy to renew gasket on oil filter housing were it bolts onto engine block ,,from what I can see appears to be two bolts to undo,,but is there any gears or anything to be aware of when removing
thank you aly fraser

Billy B · Aug 21, 2013

From memory, its just a case of unbolting it. But it was a while ago I did mine

Turboman would know the answer, I know he runs a 19j anorl

Billy B · Aug 21, 2013

Just check its defo the housing cause my leak was on the pressure switch, which is definitely just a screw in job

foxy333 · Aug 21, 2013

Billy B said:
Just check its defo the housing cause my leak was on the pressure switch, which is definitely just a screw in job

good point Billy hard to see because vacuum pump is in the way but will check to make sure thanks for your comments

2.5 td 19j oil leak from oil filter housing

foxy333

New Member

Billy B

Well-Known Member

Billy B

Well-Known Member

foxy333

New Member

Similar threads