2.5 petrol carbytooter info required

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

The Mad Hat Man

Well-Known Member
LZIR Despatch Agent
Posts
83,264
Location
Embasinga stocæ
In the accompanying piccy you can see one of two vacuum connections (at least I think that is what it is. Does anyone know if it should be connected, coz fur sum reason its been blanked off on my motor?
 

Attachments

  • Picture 007.jpg
    Picture 007.jpg
    154.1 KB · Views: 226
you should have one (thin) to yer dizzy and a thick bastard from the manifold to yer servo ifin y'awl got one. if thats a extree one its could be fer a vaccuuum gauge ...is that a webber y'awl got fitted?
 
thats a damn good question. I should have said - but it is the standard Webber 32-34 DTML as fitted to 2.5 petrol deependers. I would have thought a man of your caliber would have known that ;):p
 
you should have one (thin) to yer dizzy and a thick bastard from the manifold to yer servo ifin y'awl got one. if thats a extree one its could be fer a vaccuuum gauge ...is that a webber y'awl got fitted?

I have, indeed got a fin one from the distribytator and a huge (in comparison) one from the fannymold to the servo - but the carbytutor has two of these ickle connections - one goes, as sed, to the dizzy and this one has a bit of green lecky tape blanking it off.

soz el Slobmeister - yu been away - yes its a series3 with a deepender 2.5 petrol lump in it. looking at the deepender "rave" it is correct wiv lecky fuel shutorfs n all.
 
Back
Top