Mark22_2
Member
- Posts
- 10
- Location
- Calne, Wiltshire
Hi, I brought my 1985 90 2.5 na with a known leaking fuel injection pump. Its local and was driving upto that point.
I've had the pump refurbished and also fitted a new lift pump.
I've set the timing as per dots on the 3 pulleys and tensioned belt etc.
The bit I'm struggling with is the pump timing! The tool doesn't want to drop into the hole inside the pump when I twist to advance / retard.
The engine starts on old timing pointer Mark's but sounds like its babbling back through inlet and occasionally there is a small tap from engine if revs are lifted. Also its pouring white unburnt fuel smoke out of exhaust.
Any ideas where to go next? I've had rocker cover off and everything looked to be opening/ closing as it should.
Thanks
Mark
I've had the pump refurbished and also fitted a new lift pump.
I've set the timing as per dots on the 3 pulleys and tensioned belt etc.
The bit I'm struggling with is the pump timing! The tool doesn't want to drop into the hole inside the pump when I twist to advance / retard.
The engine starts on old timing pointer Mark's but sounds like its babbling back through inlet and occasionally there is a small tap from engine if revs are lifted. Also its pouring white unburnt fuel smoke out of exhaust.
Any ideas where to go next? I've had rocker cover off and everything looked to be opening/ closing as it should.
Thanks
Mark