300bhp/ton
Well-Known Member
- Posts
- 5,009
- Location
- Near MK
Don't MoD 2.5's use the 1.6 transfer box instead of the 1.4 as found in most other 90/110's?
2.5 good or bad?
- Thread starter Ethan8
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
jamesmartin
Well-Known Member
- Posts
- 91,879
- Location
- louth lincs
2.5na used 1.667 whether miltary or civvy
flat
Well-Known Member
- Posts
- 9,075
- Location
- Far away from you!!
yep. Thats what I know aswell.
On a side note, cambelt changed on my 2.5 today and engine re-timed. Immediately noticed a difference, started and idled much nicer and seemed smoother in the pickup when accelerating (not that it is smooth or accelerates lol)
so if you have one of these, check your timing. I suspect mine was slightly retarded
Taffy
Active Member
- Posts
- 470
- Location
- Wrexham North Wales
I have ex mil 2.5 n/a and in a month or so I am gonna replace the Cambelt but howdy u re time it ? If I may ask ?
flat
Well-Known Member
- Posts
- 9,075
- Location
- Far away from you!!
There is a bunch of dots line up. Haynes manual explains how, or a quick google session will reveal all!
santel1975
New Member
- Posts
- 2
Running a 2.5na in my series 3 jumps about on tickover and shacks
Dash etc do you think it has the right engine mounts ?? I know they rattle anyway but
This seems a bit extrem
Dash etc do you think it has the right engine mounts ?? I know they rattle anyway but
This seems a bit extrem
FlyingPete
Well-Known Member
- Posts
- 1,305
- Location
- Coventry
Most late '80s vehicles will have had the 2.5td (19J). I have this in my 90 and I like it. It gets a lot of bad press which is not entirely deserved. Mine will cruise happily at 60 on the motorway (and will do a noisy 70) and will tow without any trouble at all. Pre-1986 they would have been fitted with the non-turbo engine, which has less power but will still plod along well. You may struggle on hills when laden though. AFAIK the petrol engines give good performance but are thirsty.
At one point it was cheap and simple to retrofit the 200tdi engine from a discovery or defender, so it's not uncommon to find an older vehicle with a newer engine. This would probably be the best option if the conversion's been done well, but there's nothing fundamentally wrong with one of the older engines.
At one point it was cheap and simple to retrofit the 200tdi engine from a discovery or defender, so it's not uncommon to find an older vehicle with a newer engine. This would probably be the best option if the conversion's been done well, but there's nothing fundamentally wrong with one of the older engines.
samc88
Drivels spiritual representative
- Posts
- 2,838
- Location
- Anglesey, North Wales
My series easily does 70 with a 2.5 in, takes a while to get there though. Can cruise nicely at around 65 on the flat on a good day and it feels like it has more to give. (checked with a gps before anyone accuses the speedo of being dodgy 
)
Bombproof engines, just pretty slow
)Bombproof engines, just pretty slow
zeaphod
Well-Known Member
- Posts
- 3,107
- Location
- Belfast, Norn Iron
I've just finished 700 odd miles, averaged 35mpg. In one 200 mile part of the trip, I actually managed 40mpg! That's cruising at 50/55 mostly, the roads in the West of Ireland don't support high speeds. I'd be interested to discover what RPM you're doing at 85mph, I always thought the engine sounds happy at 60. Mind you, I can hardly hear the engine over the gearbox noise at anything over 50!
What revs?
FFS mine is a 1990 110 and you think that I know what revs!!
She runs quietly enough for me to listen to the new fangled wireless/CD thingy at whatever speed I am doing, without the volume turned anywhere near loud!!
BTW I don't have any soundproofing fitted either!
FFS mine is a 1990 110 and you think that I know what revs!!
She runs quietly enough for me to listen to the new fangled wireless/CD thingy at whatever speed I am doing, without the volume turned anywhere near loud!!
BTW I don't have any soundproofing fitted either!
markjgray94
Member
- Posts
- 79
- Location
- Northumberland
I get 55-60mph had 75mph once going down a hill
Clunkbucket
Active Member
- Posts
- 184
- Location
- Cumbira
What revs?
FFS mine is a 1990 110 and you think that I know what revs!!
She runs quietly enough for me to listen to the new fangled wireless/CD thingy at whatever speed I am doing, without the volume turned anywhere near loud!!
BTW I don't have any soundproofing fitted either!
Based on this I am doing it wrong! I have a 300tdi 90 with a 1.4 - 1 transfer box and 235/85 tyres and I can't do more than 70 without my ear drums bursting, flat out with fingers in the ears steering with knees I can just about get 80mph on the flat! Listening to a radio if there was one would be impossible beyond 50mph and even a conversation shouted at 70mph is tricky! Maybe I should rebuild a 2,5na and fit that.
You can't go wrong with a well-built and well-tuned 2.5 NAD!
Most have been set up by spanner monkeys who don't know how to use a stethoscope!!
Clunkbucket
Active Member
- Posts
- 184
- Location
- Cumbira
My TDI is losing water, not into the oil (at least not producing mayonnaise) and not onto the ground, so I am semi serious about dropping a 2.5NA as it is an early 90.
I don't own a stethoscope but I am familiar with using a large screw driver placed between the block and the bone just in front of the ear to listen to what is going on inside the engine. But what is it that you are listening for, is it just a sweet spot, or is it more scientific?
The 2.5na certainly has a less harsh sound than the TDI.
