P38A 2.5 dhse 2001

P

Perry8421

Member

Posts

12

Location

Cornwall

• Apr 3, 2021

• #1

Had to change battery and now comes up with key code lockout if you turn key in ignition it says press remote but still nothing eka no good either any idea

 

Grrrrrr

Technician, Bodgit & Scarper Ltd

Full Member

Posts

19,281

Location

Buckinghamshire, UK. ('95 DT)

• Apr 4, 2021

• #2

Perry8421 said:

Had to change battery and now comes up with key code lockout if you turn key in ignition it says press remote but still nothing eka no good either any idea

Click to expand...

Is the RF receiver plugged in?

How many times did you try to enter the EKA?

Was the central locking fully functional before you changed the battery?

@mozz smith is the man at getting these running without diag.

 

Mark Piercy

Well fumbled member....

Full Member

Posts

12,601

Location

Sud ouest France !

• Apr 4, 2021

• #3

Put the key in the door and press the unlock button while unlocking and then lock while locking. It works on my 1999.

 

T

tomcat59alan

Well-Known Member

Posts

18,611

Location

wirral and triquivijate

• Apr 4, 2021

• #4

Perry8421 said:

Had to change battery and now comes up with key code lockout if you turn key in ignition it says press remote but still nothing eka no good either any idea

Click to expand...

If you have key code lock out message you will have to wait for at least half an hour until the message clears before you can retry the EKA code.if you open the door after two attempts you can carry on trying and won't get lockout again. Make sure you enter the code precisely with the key returning to vertical between open and closed position.Good luck.