2.25 Petrol 90 non starter

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

cma

New Member
Posts
6
Location
Newport
My 1985 2.25 Petrol 90 will not start. When you turn the ignition key half way you can hear the fuel pump tick, but on full turn there is nothing. No noise, no turn over, just dead.

The battery is new. Please help!
 
If you're not hearing the solenoid in the starter click when you move the key to position three, it points to the ignition switch or solenoid. Are you getting the battery and oil pressure lights at position two?
 
Hi Zeaphod thanks for replying. Yes I am getting the battery and oil pressure lights at position two. How can I check if it’s the ignition switch or solonoid?
 
The ignition solenoid is on the rear of the fuse box on the driver's side (RHD). Take the cover off the fuse box and give the area to the right of the fuses a good knock and see if that frees up the solenoid. Failing that undo the two screws that hold the fuse box to the bulkhead, the starter solenoid has a thick white with red stripe wire going to it.
 
Last edited:
The little wire on the starter had come loose. Started first time and she is now purring away.

Thanks for your time Rougharse / Gmacz I’m a happy chappy again.
 

Attachments

  • 2D707384-3498-4B9C-B24D-A597A48321B4.jpeg
    2D707384-3498-4B9C-B24D-A597A48321B4.jpeg
    315.4 KB · Views: 194
Back
Top