19J cooling

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
FlyingPete

FlyingPete

Well-Known Member
Posts
1,305
Location
Coventry
So what are my options for this conversion? The original viscous coupling works well enough, but will it fit behind a standard rad is the question.

I don't want to move the front end forward as I was looking for a standard appearance, so if not, could the radiator be pushed forward slightly in the front panel? Failing that, what about fitting a 2.25 water pump and fixed fan (assuming it's any shorter.) I'd rather avoid electric fans really but can be done if necessary.
 
Can you not fit a fan on the other side of the rad? I was looking at a series 1 recently that had been modded for trailing, it had its fan between the grill and rad, looked quite good.

Col
 
Electric fan in front of the rad would be doable, but I was hoping to stay engine-driven for simplicity. If there's enough space for an electric fan before the radiator, I might try shifting the radiator forward into that space to make room for the original viscous fan. A big engine-driven fan with a proper shroud shifts a lot of air, and I don't want to compromise on cooling with this engine.
 
My Perkins sits close to the rad and so I have an electric fan in front of the rad. I would go that way anyway as its good to have the electric fan as an option and its simple - you can just use a switch. I've just done 200 miles (loaded) in 80deg heat on the motorway and the engine temp was higher than I would like and the electric fan had to run the whole way so I'm looking to squeeze in a small engine fan into the little space I've got to give me 2 fans Would that option work for your set up?
 
All comes down to space between the engine and rad. Might be a case of dropping the engine in with the original fan fitted, then see how the radiator lines up. The radiator is made for that engine and only a few years old so would be good to make it all fit in and keep a standard cooling setup. The 109's original radiator (and petrol engine) is long-gone and it had a knackered 200tdi shoved in badly with no cooling fan and a questionable disco radiator!
 
With 19j stick with original cooling system if you can, they do need good cooling [ not having an intercooler means inlet air temp is a lot higher ] and the in rad oil cooler working. Ran one for 15 years, had twin electric on mine. [ in a 90 ]
 
Blackburn said:
Is there any reason you cannot add an intercooler?
Click to expand...

Not if you can find room for it, the rad for a 19j doesn't have room in the frame for one like a Tdi rad.
And you have to find a way to get the hoses to the intercooler.
Quite do-able if you have time and ingenuity, but it might be easier to get a Tdi and fit it.
 
Turboman said:
Not if you can find room for it, the rad for a 19j doesn't have room in the frame for one like a Tdi rad.
And you have to find a way to get the hoses to the intercooler.
Click to expand...

We're tinkering with an engine at work with a water-cooled intercooler. I keep thinking that would be simpler as you only have to route small-diameter water pipes to the front.
 
FlyingPete said:
We're tinkering with an engine at work with a water-cooled intercooler. I keep thinking that would be simpler as you only have to route small-diameter water pipes to the front.
Click to expand...

That sounds quite interesting, although not in a Land Rover context. Pics would be welcome if you have any.
 
Turboman said:
That sounds quite interesting, although not in a Land Rover context. Pics would be welcome if you have any.
Click to expand...
A NDA with the customer gets in the way of that!:eek: The basic setup is fairly simple though- air from the turbo passes through a water-cooled heat exchanger, and an electric pump circulates coolant to a small radiator mouted in front of the main one. Means a shorter and more efficient induction system with less lag. Similar to most supercharged engines and I think several manufacturers use a similar setup.
 
You must log in or register to reply here.

Similar threads

C
Military series III, does it have a different water pump? Why?
Replies
13
Views
2K
Wolf Pack
W
enjoi
P38A Going through radiators- not overheating
2 3 4
Replies
60
Views
4K
enjoi
enjoi
M
19J timing case on 12L discovery engine
Replies
4
Views
768
lynall
L
Danil89Sever
L322 Problems with the ds2 bus (k-bus), I cannot change configurations and load them, there is no communication with the blocks.
Replies
4
Views
847
Graculus
Graculus
T
Series 3 Overheat after motorway run
2
Replies
26
Views
3K
Turboman
Turboman
Back
Top