1999 Discovery td5! Front right wing replacement!

Hi out there!
Just had a bump (Or my wife did!) on the front passenger side of my TD5. Unfortunately, I need a new bumper and the Lower engine cover, or Skid plate. Refitting those shouldn't be a problem, but I also need to replace the front right wing! Is this an easy job, or does it require welding, which I don't have? Any suggestions, very welcome indeed. Thanks in advance! PS: I've been told it's not that difficult. If they knew me!!!

Try the disco section

Front wings are fairly simple to change just undo the bolts along the top under the bonnet and there are a few bolts by the drivers door, you can get to them with a long reach socket with the door open. The hardest bolts to undo are the 2 or 3 on the inside of the wing at the bottom there normally rusted solid. And there is a couple of bolts behind the indicator.

grey110hicap said:

Front wings are fairly simple to change just undo the bolts along the top under the bonnet and there are a few bolts by the drivers door, you can get to them with a long reach socket with the door open. The hardest bolts to undo are the 2 or 3 on the inside of the wing at the bottom there normally rusted solid. And there is a couple of bolts behind the indicator.

Click to expand...

Hi, thanks so much for that.So pleased there's no welding involved! Appreciate it!