1997, 90 handbrake light

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
micknkatenki

micknkatenki

Active Member
Posts
438
Location
Lincolnshire
Hi all, just a quick question - handbrake warning light, should there be a 12v live feed to switch at the lever, then it earths through lever/bracket/body. ????

Light not working, found wire from switch not connected to anything and can't find where it connects to.

Thanks :confused:

P.S. have searched for other threads first.
 
The wire is connected at the switch end but it is only about 4" long with what looks like a bullet terminal and that's it, can't see where it has broken off from.
 
Yes, switch is there and the wire is connected with the proper spade terminal, then wire goes through to underneath and that is that, the end. :confused:
 
Well the other end of the wire goes to the brake symbol on the dash................

Looks like you might be tracing wires.......................

Mine works now and again as the switch (new) is **** and at £15 i can live without the light working :)
 
You must log in or register to reply here.

Similar threads

C
Brake warning light on
Replies
8
Views
2K
Collman
C
D
1997 defender interior light
Replies
6
Views
835
drfoster
D
dag019
Handbrake warning light wiring
Replies
10
Views
2K
mystery
mystery
cappers
Shorted the ignition switch feed!
Replies
7
Views
535
miktdish
miktdish
S
1988 90 replacing lights with LEDs and have lots of questions
Replies
5
Views
852
sleepybear
S
Back
Top