110 from 3050 to 3500kgs can it be done? help needed

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
D

dustyhorse

Member
Posts
20
Hi

I would to know if it possible to uprate a 3050 110 defender to 3500kgs gvw

if so what is needed and who signs it off when finished?

cheers
 
With the right modifications it can be done! I.E heavier duty springs, increased strength in load bay etc...
But as for who signs it off, at a guess I'd say VOSA or DVLA or something, would be best to contact them... Guess it'll probably cost ya' though! B*astards. :p
 
i thought all 110 where 3.5t or is it just certain ones as the 1 i have now and the 1 before it where both plated at 3.5t
 
most are 3050kgs

I want to make a tipper and as all the load will be carried over the back axle it needs to be the higher weight

also I want to carry heavy things like gravel and blocks
 
im in the process of getting mine converted into a tipper as it was a hi cap im hoping to have it done buy next sunday
 
i dont need to as mine is rated at 3500kgs but i have put air bags on it to help with the weight as i will be pulling a chipper plus wood chip and logs
 
Beneagles said:
Noisy for a noob ain't ya? An introduction might be nice too.... before someone starts shouting at you! :D
Click to expand...

oops sorry

although new to here this question has been going on for a while

I put a post on lro with no outcome and a chap n the village said Landyzone was the way to go

Dlva say they don't know the modifaction but have a form for it

Vosa say they don't know
Landrover say they don't recomend it
but Nene who don't answer their emails openly advertise it is a service they offer

so not shouting just a little frustrated

cheers
 
Phone a company called Sv tech who will advise you
Though you can ignore me for a second time I have modded more different types of vehicles including Landrovers than most
 
pressbrake said:
Phone a company called Sv tech who will advise you
Though you can ignore me for a second time I have modded more different types of vehicles including Landrovers than most
Click to expand...

Hi

didn't ignore you, new to this site ans I didn't see the little second page icon

thanks for yor help

cheers
 
cornish rattler said:
I would have thought other than suspension and a stronger back axle everything else would be there but would need the ID plates fitted to prove it :)
Click to expand...

Thanks to all those who replied

question in now answered

it is possible to have done and costs just over £1000 plus heavy duty wheels and tyres

There are a couple of firms who do it and they have bought the rights to do the job (paperwork wise)

a private person could also do the job but they would need tp part with approx £10000 for these rights

cheers
 
You must log in or register to reply here.

Similar threads

tweedandbriar
Flat Spot at low revs...
Replies
4
Views
338
tweedandbriar
tweedandbriar
stoney424
What colour speedo drive gear should I be using?
Replies
3
Views
429
miktdish
miktdish
L
Newcastle mech recommendation?
Replies
8
Views
475
neilp1
N
H
Building the dream 110
Replies
16
Views
2K
shaynecm
S
L
Protecting a Defender 2011, 110 from the elements without a garage
Replies
13
Views
937
landybex
L
Back
Top