110 County Air Con Vacuum Lines

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
P

p38arover

Guest
I was hoping someone will have a schematic drawing of the vacuum lines for a
1984 110 County air con/heater system.

In the rear of the heater control panel on mine is a "D" shaped connector -
much like a computer D-connector. there are 7 positions for vacuum lines on
this in two rows (3 "pins" and 4 "pins"). Four of the lines are blanked
off.

My problem is that I can only find two vacuum lines in behind the dash which
would obviously connect to the connector - the others go to the vacuum
servos. If I had a schematic I might be able to sort it out.

Any assistance would be appreciated.

Ron Beckett
Emu Plains, Australia
1995 P38A Range Rover HSE 4.6 Litre V8
1984 Land Rover 110 County 3.5 Litre V8


 
Ahh, I think I've worked it out. Another vac line had tucked itself down
under the lip of the dash. I'll draw up the schematic and add it to my
website so that others may use it.

Ron


"p38arover" <[email protected]> wrote in message
news:[email protected]...
>I was hoping someone will have a schematic drawing of the vacuum lines for
>a 1984 110 County air con/heater system.
>
> In the rear of the heater control panel on mine is a "D" shaped
> connector - much like a computer D-connector. there are 7 positions for
> vacuum lines on this in two rows (3 "pins" and 4 "pins"). Four of the
> lines are blanked off.
>
> My problem is that I can only find two vacuum lines in behind the dash
> which would obviously connect to the connector - the others go to the
> vacuum servos. If I had a schematic I might be able to sort it out.
>
> Any assistance would be appreciated.
>
> Ron Beckett
> Emu Plains, Australia
> 1995 P38A Range Rover HSE 4.6 Litre V8
> 1984 Land Rover 110 County 3.5 Litre V8
>



 
p38arover wrote:
> Ahh, I think I've worked it out. Another vac line had tucked itself down
> under the lip of the dash. I'll draw up the schematic and add it to my
> website so that others may use it.
>
> Ron
>
>
> "p38arover" <[email protected]> wrote in message
> news:[email protected]...
>
>>I was hoping someone will have a schematic drawing of the vacuum lines for
>>a 1984 110 County air con/heater system.
>>
>>In the rear of the heater control panel on mine is a "D" shaped
>>connector - much like a computer D-connector. there are 7 positions for
>>vacuum lines on this in two rows (3 "pins" and 4 "pins"). Four of the
>>lines are blanked off.
>>
>>My problem is that I can only find two vacuum lines in behind the dash
>>which would obviously connect to the connector - the others go to the
>>vacuum servos. If I had a schematic I might be able to sort it out.
>>
>>Any assistance would be appreciated.
>>
>>Ron Beckett
>>Emu Plains, Australia
>>1995 P38A Range Rover HSE 4.6 Litre V8
>>1984 Land Rover 110 County 3.5 Litre V8
>>

>
>
>

Hi, I have the same model (I think) - what is your web address? My Air
con controls have three sliders and a green button. My problem is that
the compressor has seized - do you know how to repair them?

Stuart
 
Back
Top