zefrench
Active Member
- Posts
- 428
- Location
- Ontario, Canada
Thanks for taking the time to video record it all!!
1.8 Freelander engine coolant passages connection inlet passages to exhaust passages
- Thread starter niccage
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
niccage
Active Member
- Posts
- 227
- Location
- Glenmore Park NSW Australia
Was a pleasure. I hope it assists other Freelander 1.8 K owners out there even if they don't want to do the work themselves then even their non-Freelander specialist mechanics. My tip is that if you renew the head gasket on this engine without renewing the oil rail to the uprated one, then it will fail again. I did mine in 2012 on the same car as in that video but didn't change the oil rail. In March 2014, the head gasket lost clamping load thanks to the head bolts bolting in to the older rail, and coolant started to leak.
Doesn't make a toss of difference sequential hgf is routine
niccage
Active Member
- Posts
- 227
- Location
- Glenmore Park NSW Australia
Here's another video I shot for the proper way to bleed the cooling system on the 1.8 K Series Freelander. 1.8 K Freelander Cooling System Bleed - YouTube
I hope that my videos will encourage owners of the 1.8 K Freelander that it's not "be all end all" when they get some of the symptoms that my one experienced.
I hope that my videos will encourage owners of the 1.8 K Freelander that it's not "be all end all" when they get some of the symptoms that my one experienced.
