P38A P38 eas issues

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
That's usually the stud turning in the plastic housing. I replaced one with an allen bolt, so I can hold it from underneath while tightening the nut.
 
That's usually the stud turning in the plastic housing. I replaced one with an allen bolt, so I can hold it from underneath while tightening the nut.
Just found this, o ring must have got trapped and ripped

Ive found one ripped and two more crushed.
 

Attachments

  • IMG_20250826_112306_MP.jpg
    IMG_20250826_112306_MP.jpg
    102.7 KB · Views: 8
  • IMG-20250826-WA0001.jpeg
    IMG-20250826-WA0001.jpeg
    120.2 KB · Views: 8
Last edited:
That's usually the stud turning in the plastic housing. I replaced one with an allen bolt, so I can hold it from underneath while tightening the nut.
I have a spare pressure switch that I have decided to fit out of precaution. I have depinned connectors before but does it matter which wire goes where?
 

Attachments

  • 17562233587945533978068401186353.jpg
    17562233587945533978068401186353.jpg
    367.3 KB · Views: 4
Back
Top