Will series crossmember fit Defender

[landowner]

LAND ROVER SERIES 2/2A/3 REAR CROSSMEMBER WITH EXTENSIONS ***FAULTY*** | eBay

Looking at this as a repair piece instead of welding a patch on the 90

 

[owl]

The chassis rails on your 90 are different they go down from the x-member so will need some modification. if you have a rear tank then further mods will be required and not sure if the body mountings are in the same place.

 

[landowner]

The chassis rails on your 90 are different they go down from the x-member so will need some modification. if you have a rear tank then further mods will be required and not sure if the body mountings are in the same place.

Arha.
Might only need the actual Crossmember because the chassis rails are in excellent condition.
Crossmember just a bit crusty behind the wheels at the edges

its a 1990 btw

 

[pressbrake]

depend by what you mean by will it fit, A old bit of wood will fit
body tags will line up, but there is no exhaust bracket. I reckon its worth doing just to confuse the rivet counters!

 

[landowner]

depend by what you mean by will it fit, A old bit of wood will fit
body tags will line up, but there is no exhaust bracket. I reckon its worth doing just to confuse the rivet counters!

Exhaust going elsewhere, as long as body mounts line up then I can bash and weld the rest into place

It would have them all guessing an its cheap