Good point…will check that when in get up the courage to crawl underneath it.
Does it have to be on a level surface rather than ramps and engine running to check the gearbox fluid level?
I bought mine with quite a few issues which I am working my way through….main ones now is gearbox fluid change and I believe front nearside air strut is leaking.
Good luck with yours
Thanks Brian,
Seen the Britpart kit for around £180 with metal sump and detached filter including the ZF fluid.
Looks doable on the videos with tight access on a few of the sump bolts.
My RRS has no history and 170,000 on the clock.
Evening All,
managed to sort the electrical wiring issue causing a transmission error every time I engaged drive…12v live feed to gear shifter had a broken wire in the loom.
moving onto my next issue …I have the delay changing from 1st to 2nd gear and intermittently the thud when changing up ...
Cheers Dave….was a bit of a ball ache to find.
A lot of knowledge about the wiring and modules acquired.
BCM and Traction Control module removed and cleared of corrosion
*********SUCCESS************
I finally cracked it….
I did not have the permanent 12v on pin 8 of the gear shifter connector.
12v on the BCM fusebox so a disconnect on the purple/blue wire between the two.
The 12v leaves the BCM via pin 45 of the large blue connector bottom of the fusebox and...
Hi,
Checked the earths at the A and B pillar bases have yet to check inside the passenger wheel arch.
I could see corrosion on the fuses at the BCM fusebox.
Just removed it to clean all the contacts and check the connections for water ingress.
Just thinking about the gear selector are they interchangeable between all the L320s irrespective of engine size ?
The one on my supercharged is gear selector 6h32-7Z370 , I can’t see the supercharged gear selector on the net or eBay, it shows the 2.7 and the 3.6 but not the 4.2.
Wonder if the...
Reading up on a few forums …i believe it’s a voltage supply issue to the gear shifter if the headlight trick works, so will be looking at the fuses on the BCM fusebox.
The other thing I am unsure of is the lamps/leds on the gear selector are they supposed illuminated on the sport like the L322...
It cleared up pretty well with a toothbrush and contact cleaner,
Was hopefully spend some time on it tomorrow.
Assume that that when Drive is engaged a signal is sent to the TCM.
Not sure if the wiring goes directly from shifter connection to TCM or does it run via the BCM fusebox?
Hi All,
Still have the transmission error coming up when drive engaged….
So far I have eliminated any broken wires or corrosion in the passenger sill wiring loom.
The previous owner replaced the stick selector.
Removed the TCM which had only minor corrosion on the pins and plug, which I...
Cheers Tricky
I know what you mean, a sense of achievement when you have managed to fix something.
Will have a go at anything electrical or module related.
Gearbox flush and megatronic will leave to the experts or at least someone with a lift 😉
Seen posts on other forums saying it was the green/pink wire that corrodes and breaks causing the transmission error code but I cannot see that wire in my loom wonder if the wiring colour may be different between models.
The previous owner also changed out the stick shifter , so that’s ticked...
Thanks Datatek,
Checked the voltage at the battery yesterday at idle it was 13.94v.
Battery replaced by previous owner less than a month ago.
Did see another post on here about the earths especially the ones behind the cover of the osf wing.
Would like to take out the fusebox BCM behind the...
Forgot to add these additional errors come up on scan when you switch on lights and engage gear.
U0155..lost comms with cluster.
P081c..Park imput circuit
U0182…lost comms with front lighting module
U0159…lost comms with parking assist module
Hi All,
As mentioned in my previous post I am back in Range Rover ownership with a 2005 RRS 4.2sc.
It has quite a few faults that I am working through but would value your opinions/help with a few things?
The main issue is the car has the Transmission Error come up when you engage Drive.
I have...