Search results

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. A

    D2 with shuttle valve switch 4114

    Contact your nearest cealer and ask them if they would be willing to supply you a copy of the tech bulletin that was released on this fault few years back, it explains some wiring tests to rule out wiring then gives instructions for low level repair on shuttle valve, its quite a straight forward...
  2. A

    Starting question

    before you start the car in morning turn the ignition on till the heater plug light goes out and do this 3 or 4 times before trying to start if it starts ok after heating them few times then the glow plugs are gone need to renew them. I'm assuming it's a P38 if so behind the battery where the...
  3. A

    petrol to diesel

    Get a cheap 1.8 engine if they don't want to scrap it, to put diesel in need to change the gearbox, IRD and drive shafts to try fit Td4 then subframe woud need to change to. As previous post reckons an engine can be sourced for as little as 500 that would be best option then sell and get some back.
  4. A

    New no Land Rover

    Hi all, i'm new here don't own and never have owned a Land Rover and probably won't ever be able to afford the one that i want whih at the moment is a 2011MY vogue, i do though bring the party 25 years of working in the Land Rover Dealership from the first Classic with EFi and ABS to the...
  5. A

    Left indacator problem

    Hi real, if you remove the O/S/R light unit you will see a large 7 pin brown connector, thats for the towing electrics. Disconnect it and try your flashers, chances are if the tow socket was welded on the heat would have melted the insulation on the harness at the socket. You can buy the tow...
Back
Top