Search results

will do james part that has me stumped is why gauge fuel light work when disconnecting live feed /blue white from efi then connecting .blue /white from sender to old wires

hi james pump has earth to connection on chassis and an earth in harness to earth connection in sender . efi pump/sender unit has three wires blue /white .live feed from efi. black earth green i thought would be feed to gauge . old wiring has black/ blue and green wires

old thread i know finished putting 93 hotwire efi into my 72 3.5 rangy all running nice only probs so far are .fitted 3.9 plastic tank with in tank pump. using 72 wiring if i earth 1 of the old wires gauge goes to full /earth other 1 fuel light comes on. but if connected to new pump sender no...

lt95 4 speed with vacume diff lock .from early 3.5 v8

hi in the same boat here in middle of fitting 3.9 hot wire engine auto into 3.5 manual motor keeping manual box . same question is it simply a case of soldering a resister between the correct wire from efi multi plug and a good earth if so does anyone know the correct resistor to use and were...

a that's great thanks for you help . do you have any info on road speed censor . looking at efi plug looks like the yellow wire from censor plug (again the bit harness from censor plug goes into main harness in old car presumably to feed speedo ) thinking yellow will go into yellow conection in...

cheers james no wiring loom for box present i am only guessing that the efi picks up the inhibitor side of things will be fitting engine into manual rangy .the auto box wiring plugs into main harness for auto car . but thought it would also be spliced into efi system somewere if not then...

Hi James i don't have the plugs as going from auto to manual have all the efi harness from engine to ecu and including the main plug from drivers foot well .thought their was a wire to earth out in this plug that was used in auto box wiring to inhibit starting in drive.

watching this thread as doing same ish swop 3.9 efi auto into 72 3.5 manual keeping man box couple of questions for you sparky experts to bypass auto inhibitor switch do i just connect yellow and black wire that goes to switch to ground .and road speed censor wires understand that yellow wire...

cheers mal

poss nothing to worry about looking at haynes book wiring looks like no sensor fitted ecu triggered from coil connection .can anybody confirm this cheers

about to do same 1993 .3.9 efi auto into into 1972 3.5 carb manual . was planing to use 3.5 flywheel and clutch and four speed box only thing is not sure about crank sensor will it work or will it need 3.9 manual flywheel anyone know. cheers

not intending to get involved with pricing that's down to seller and buyer was only stating that i know the motor and i can vouch that it has had a good repair record . if its worth £10.00 or £ 10 grand makes no diffo to me . as stated i have no interest in selling this motor . you know how it...

allreet john just spotted this post while browsing . some peeps on here know i run a small company just me and my partner repairing and building land rovers . no names not advertising . but i know this motor very well done loads of work on it for seller won't say how much cash he has spent on...

give www, northeast laners a go do a few runs around this neck of the woods free to join nowt to hard or going to brake ya motor

what is it your wanting to do mate green lanes off roading or just get involved in the socal side of things

mine looked the same with the same springs and shocks for the first couple of weeks now sits nice and even as for shocks cut a bit from threds if not the shock bends were it meets the threded part after u hit a few bumps

well not today but over this weekend i have changed the engine /clutch/ clutch master and slave cylinders

not wanting to put a spaner in the works . But just over the last few weeks have had a flash of the lights and a wave from a suzuki and a frontera . whats going on has it moved to all 4x4/s or is it just down to bad luck

have you tryed asking penman direct i used to work for a company who made windows for penman armerd cars try a serch on google for penman engenering heath hall . dumfreise. scotland