Search results

When changing these engines over the only thing you can't change is the FIP, the RR doesn't fit the BMW block, however through weeks of hassle and tears we eventually took a chance and changed the electrical unit on the pump, this is the top half of the FIP, the two pumps are wired completely...

The injection pump fitted to the BMW 525 engine which we put in the RR is a 995, this will not communicate with the RR Electric Control Module/ECM or ECU which is fitted beside the battery. The original RR pump, a 994 will not physically fit the 525 engine as the front boss/seal is different...

Well, we finally got to the bottom of the fault, the 525 engine is running in the Range-Rover. The injection pump from the RR won't fit the 525 engine, the boss size is too big, but...it takes 10 minutes to remove the electric control module from the top of the 525 injection pump and replace it...

If you've run it without the belts and the noise is still there then its likely to be the big ends or at least one, i'm in the middle of fitting a 525 engine to '97 dse because the big ends failed due to low oil level

Just had the guy check the numbers on the pumps, the one fitted to the 525 engine is 995, does anyone know whether or not this should work with the Range-Rover ECU or am I going to have to fit the 994?

Right, we connected the sync mate, solid blue light, then solid green signifying that the BECM is already sychronised. Following checks confirmed that when the ignition is turned on the heater plugs work, whilst they are being powered the relay for the in tank fuel pump is triggered, when the...

I didn't transfer the ecu and now I have no chance as the donor car has been scrapped. The in-tank fuel pump was working before I disconnected the battery to put the battery/starter lead around the back of the head, once we reconnected everything and tried to start it the tank fuel pump has...

Hi, my name is Tony, I live in the far north of Scotland, I'm new to this site and was wondering if someone could help me. I've searched the forums looking for the answer but can't seem to find a full explanation. I've been working in my present job for nearly thirty years, part of my work has...