Search results

done the same but got mine from maplins

not sure if the trsansfer box is working or not i can move the lever over but no light on the dash. could i check its locking up by jacking up a front wheel with the hand brake on check it spins then move the lever and see if its locked, if the wheel does lock up is it just a case of a micro...

its a 300tdi 1997

after finding the correct size trox bit for the gear box i went to check the oil only to find some clown had been at it before me and plug is rouunded, so out came the screw extractor and the plug wont move its so tight that the extractor cant hold with the force, any ideas as to A how i can get...

thanks for that

read something like this in a mag it turned out to be the pressure relief valve in the header tank cap had fallen apart so the pump pressure just blows all the water out

just a quick on what size torx bit do i need to get the filler plug out of the gear box as i dont seem to have anything that fits thanks

i was thinking someone had messed up the sump fit due to the amount of sealant that had been squeezed out when it had been put back

ok found where at least one of the oil leaks is coming from. some of the sump bolts were not tight along with a few other bits around the engine (looks like someone had it in bits before i got my hands on it). i know the damper and one of the steering rods have to be disconnected but do i have...

thanks for the info will look at doing the work on the pump if not i have seen one on ebay for just under a ton

ok new to the world of discos my 300tdi is marking is territory with what looks like a few diffrent leaks one is coming from the end of the vacume pump, is it possable to reseal this or is it a replacement job? also there is a lot of oil around the sump possablely the sump gasget leaking can...

ok new on here just picked up a 1997 300tdi and the steering wheel is well worn and is need of replacement anyone know where i can get my hands on a decent second hand one or a cover that will fit thanks