Search results

What ever you do dont put of mending it and keep opening it from over the seat, I did that and eventually the lock actuator unit jammed up and wouldnt unlock, I then had to dismantle the door card etc with the door shut and then poke the unit with screw drivers etc to unlock it (really not easy)...

I have a leaking heater matrix, have taken the center consol out and can see it is not the "o" rings and is the matrix its self, what I need to know is how you get it out, I have had a quick look on RAV and it seams to surgest the whole dash heater unit, BCM etc has to come out, I really hope...

I had this problem with the door lock, continued to use it and just keep unlocking it from the inside, this was fine untill it totaly packed up then i had to gut the door wile it was locked (really not easy) then fiddle a way to unlock it to remove and replace the lock, so be carefull you dont...

Several things, if ABS is fitted to a vehicle then it can not be disabled to pass an MOT, if it was never fitted then it is ok not to be there (if you see what i mean) Also it will fail if the light doesnt come on and then go off after starting (Nissan 200sx owners have been known to wire the...

This sounds like exactly the same noise I have, mine started in 5th only, now happens in all but 1st, I have had both Difs to bits and found nothing wrong, I have checked both props and cant find anything there either. The noise is like the clicker on the wheel of fortune type wheel spinning...

Im with derek on that one, if that is the only problem you have had with a L322 be most thankfull! But that aside a friend had a similar sounding problem with a cup holder, it ended up being a new cup holder from (yes you have guessed it) Landrover as he couldnt find a pattern part and I cant...

To the best of my knowlage I belive it will swap as they used the same auto box in both for that period of time, the only thing I think could be a problem is what ratio's are there in the respective transfer boxes as they fit different ratio's to take account of the rev diferences between the...

Hi, I put a 200tdi in a disco 2, that had a 3.9 V8 in it, although mine had a manuall R380 box in it I still needed a shorter bell housing and to change the spigot bearing to make it fit, but to find that out I rang David Ashcroft at ashcroft transmissions, quoting him the engine and gearbox...

Hi, It shouldnt fail on bump stops as they are not an MOT point, I have taken Disco's with no bump stops and passed

Hi, I put a 200 tdi in a disco 2, It has the odd complication but can be done, if I was to do it again I would use a 300 tdi as it solves a lot of the issues I had, If you want to know more send me a message with any questions and I can give you some answers

Just a tip for you, having changed a number of core plugs in the past if you get a can of hamerite paint or similar and give the new plug several good coats of paint before fitting it then it will last a lot longer :)

I fitted a K and N filter to a 200tdi engine, I have to say im not sure I have noticed and difference in performance, I only did it as I put a 200tdi in a disco 2 and none of the other air filters would fit