Search results

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. T

    head gasket

    right car all back to gether with new head gasket started ok went for test drive and runing realy nice and smoth to be honest seems even smother than b4 . had a prob with the back injecter leeking but took the feed pipe back off and reseated and that seems to be ok and car seems ok now made up...
  2. T

    Another p38 air suspension problem

    got the pump wprking guys by past the thermal cut out switch jumped a wire accross from the orange to the black earth cable and pump wprking as it should till i can sort out a new switch many thanks for your help tony :D
  3. T

    Another p38 air suspension problem

    D'oh :doh: got it wrong guys :eek: eventualy got a replacment ecu pluged it in with big smile on face thinking going to have suspention working again. started car but f--k compresser still not runing could not belive it because i had rooled everything els out i was at a loss what to do now...
  4. T

    head gasket

    hi guys put the head back on to day and got every thing back to gether and the car started and it ran sweet and no gasses in the water system so hopfully i have sorted it just wanted to ask if any body can tell me after i had the exhast manifold off do i need to renew the gaskets of can u reuse...
  5. T

    head gasket

    ok spent this morning cleaning up the head i think i may have found a crack between exhaust and in let valves for number 2 piston dose any body know if the water jackets run between the inlet ad exhaust valves.
  6. T

    head gasket

    many thanks guys for the help much apreceated tony
  7. T

    head gasket

    hi can any body tell me now i have got the head off when i am putting it back to gether do i need to renew the head bolts or can i reuse the old ones thanks guys
  8. T

    head gasket

    i was getting gasses in the water way as soon as the engine was started and i did notes the some of the head bolts were not that tite ie did not have to put much fores to loosen them but sume of the othere were realy tite.
  9. T

    head gasket

    ok guys finaly got the head off to day can not see any thing ovious can not see any cracks at all is there a coman place where the may be a crack or if there was a crack would i see it straght away because as i say can not see any crack at all and block looks ok. so hopfuly it is just a failed...
  10. T

    head gasket

    yes i have to agree with u i must be the head gasket or cracked head keep me busy for a few weeks hay :eek:
  11. T

    head gasket

  12. T

    head gasket

    hey guys how comon is it for a diesel p38 with bmw engine head gasket to blow ? the uthere day on motor way car over heated when i stoped the top of the radiator was cracked aparently comman problem. got new rad replaced but as car is runing the is rathere a lot off presure building up that much...
  13. T

    Another p38 air suspension problem

    ok got a bit farther with this to day got the cable and software this morning and basicaly it showed a fauld (rl sencer out ) cleared the fault and it never returned but eas still not right lowered car to bump stops and then presrd switch to rase back up but nothing hapening because pump not...
  14. T

    Another p38 air suspension problem

    hi m8 will take the pump off at the week end and try it on the bench see if i am getting much presure out. i dont know if it helps but the car never drops down if left for a few days so no leeks in suspention. but if i pres the switch and drop the car down to the access mode after the car has...
  15. T

    Another p38 air suspension problem

    hi m8 not to shore how to do the quote think but the relay there was a few relays in the box that are identical so i just swaped em round so there i a difrent relay in there now so i know that is ok. regarding pump re charging system as the pump was runing there was not much of a vacum i...
  16. T

    Another p38 air suspension problem

    finaly got out to do some more investigations tested the thermal switch that is ok went to test the presure switch tested the switch after the car has been left for a few days tested pin 7 and 9 had a open circuit started the pump runing and after it had been runing for about 10 min tested the...
  17. T

    P38 matrix & o rings

    i have the same problen wet drivers carpet how much of a job is it to get the carpet out and to change the o ring do u need to strip a lot of things away befor u can remove the carpet and matrex. tony
  18. T

    Another p38 air suspension problem

    hi ok i swaped the relay but no difrent but i have notested. ovesly the uthere day i jumped the relay and eventualy the car rose the standerd ride hight. went out for a run to see what was happening after a few miles the car endid up back on the bump stops ovesly as all the air was used up i...
  19. T

    Another p38 air suspension problem

    yes i will try the realy to be honest i have not tride another one yet was not to shore witch one to use any surgestions witch realy to use am a bit worried about pulling the wrong one out and f--king somthing els up tony
Back
Top