Search results

Alright, is it hard to replace the passenger side line(not UK) all the way to the abs? I heard it is hard but i guess i do it this way then

I found one that might work, its called loctite 545 which is made for hydraulic and pneumatic systems, but im not sure if it will tolerate the brake fluid itself. It says it is non contaminating too

would I also need to lower the fuel tank? I read somewhere that is needed when changing brake line on the right side of the car (right side from behind it)

Is kunifer copper and nickel? Thats the one i got

This is the one i used, the black die even got damaged and also the thing that holds the line

Update: After some procrastinating big time… i put together all fittings where it was corroded and where I could not open with the wrench and ended up buying a cheap and an expensive flaring tool. Difference between cheap and expensive flaring tool is day and night, no point getting cheap one...

Im not sure what you mean by green plastic coating on the pipe, i dont see any, maybe previous owner changed the whole deal and didnt use the original..

This sounds like a good idea, i already bought a cheap double flaring tool with cutter and bender, but i just need the joiner connector so i can cut off the corroded bit and add extra pipe from there. Is that what you meant?

Progress: so far i managed to get off the two bolts with the tools in the pictures. I used mini beltsander and chisel, before that i tried with chisel meant for wood….. night and day difference with the right tools However when i tried opening the brake hose and lines to change them, i twisted...

Only between 35-45C yes?

Yes i did order with shoes and drums😊👍

I guess ure right

Im going to get a 400watt one

Thank you so much for reccomendation!

After doing this to the bolt i plan to just keep using the cylinder and hope for the best Any advice would be good before i put it back together with new shoes and drums

What kind of chisel do u use? I broke mine

Ah, sometimes i think too much🙂😗

When you chiseled them off how did you afterwards get the threads off??

No the the two bolts on the bottom that were supposed to be there were missing and the last one i can feel but hard to reach which is behind the pump on the left side. Also the previous owner may have damaged some parts as it had a couple of zip ties between pump/filter and do you know what the...

Hello im planning to replace wheel cylinder, do I also need to change brake pipes as well? Is the M6 x 10mm for the wheel cylinder have 7mm head size? Or does it only matter with the thread size? Mine are rusted and i both need a wrench and maybe new bolts