Search results

Sorry for the late response life has got in the way. I am using a Snap On Solus Pro . Thanks for the diagrams I will get on it as soon as I can and report back. Thanks again for your help Gary

That might be my next problem but I'd like to have a radio to drown the noise as it dies.

Yes if you like

Apologies all It's a 2005 RR sport L320 2.7 TDV6

HI All My centre console has went dark a while back and I am now in a position to try and fix it. No display from the Sat nav or the radio. If I press the power button on the radio it comes on and goes straight off. When I put the diagnostic tool on it tells me the instrument panel has a no...

Thanks for that I'll take a look

OK I thought id give an update. I checked all the connectors and they seemed fine. Fuses where also ok. I shelled out for a new compressor and fitted it. The warning light went out and it seemed good. After cycling through the suspension settings it became apparent that the suspension was...

Thanks for clearing that up. I'll check the connectors tomorrow

Thanks for the reply. I'll do that tomorrow and post the results. I did do a data test and it gave the following result All four corners have 5v feed with zero amp current. The height sensor voltages are as follows FL= 1.85 FR=1.90 RL=1.60 RR= 1.33 Thanks again

Hi All I am back looking for some help with my 05 L320 again. I have read a number of threads in relation to the suspension but I would like some opinions before I go down the route of a new compressor and that turns out not to be the fault. I have the orange suspension light on all the time...

Thanks for the info I'll try to get my head round it; One of the pipes goes from the center top of the engine behind the fan to the connection just under the EGR valve. The other one goes to a T piece at the rear of the engine from the bottom of the radiator. I forgot to say its the 2.7 TDV6...

Hello all If like me, Easter is dealing with you RR then I thought it would be a good time for me to ask for help from the wealth of knowledge on here. I was taking some cooling pipes of the engine ( more later ) when i noticed both of these connectors where not in use and reconnected them...

All Just to close out the above problems as it is now solved. A the real time fault suggested it was the sensor. It did come back as did the suspension faults etc. I redid a diagnostic scan and found the common thread running through all the modules was the wheel sensor. I replaced it with a...

Hello All Just a quick update. I did a real time diagnosis o the wheel speed sensors and found the rear right to be defective. I pulled it out and found some rusty detritus to be stuck to the sensor. I cleaned this off and put some contact cleaner on it. I also separated the plug and did the...

OK. I'll get the misses to drive it while I have it plugged in to the diagnostic machine and see what comes up. The Radio has now gone dead after I left it out in the rain last night. It used to just have no sound but now it just doesn't come on, this looks like it could be a water leak problem...

Thanks for the information. I take it it has to be driven when doing it? Thanks Gary

Hi all I have finally got round to doing the tests that gstuart told me to carry out. The results for the Ohms tests 6->14 = 60.6 3->11 =44.4 As for the Voltage tests they were as follows 6->4 =1.68V...

Yes set it to DC. I'll have another go with another meter to see if that's the problem. Might be operator error

Just a quick.update. Due to.a family.crisis I didn't get much done on the weekend but I had a quick go at the voltage. I think there is something wrong with the way I did it as they all read 0. I will have a go during the week/weekend once I get everything sorted and I will let you know the...

Thanks again for the help. I'll got through it as you've instructed and let you know the results.