Search results

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. V

    Roof lining in a utility 90

    I would hazard a guess that the roof panels are the same minus the Alpines....I had good results using a fibreglass LaSalle covered in carpet.... Paul
  2. V

    New chassis questions

    Label EVERTHING! You will not remember where everything connects..........assess the condition of the loom before fitting and if tired or severely modified, replace, you wont want to do it twice! Paul
  3. V

    Bulkhead grommet

    345140 Paul
  4. V

    Defender Damp Interior

    Leave the bulkhead vents open when parked up and let some air circulate while you find the leaks....... Paul
  5. V

    painting ifor williams canopy

    Using etch primer, you only really need a dusting just to key to the surface, ready for normal primer, or just whack a top coat on, depends on how fussy you are!, you dont need to high build it, so a couple of rattle cans of etch should suffice.......
  6. V

    painting ifor williams canopy

    I would suggest (rattlecan) etch primimg before painting, else the paint is likely to flake off in the future....can't for the life of me see how Waxoyl would work..... Paul
  7. V

    Going back to the wolves

    Good Plan, a chap needs a couple of extra inches........ Paul
  8. V

    Best sound proofing

    I used the exmoor moulded effort in the front of my 300tdi 90 - superb! Paul
  9. V

    richard chassis

    I had a huge panic when my Richards 90 chassis was about 2cm too narrow for the bulkhead, gave them a call, apparently many are like this as they move when Galving, spread the chassis with a jack and Presto! all was well...... Paul
  10. V

    Early 110 lift up door handle lock escutcheon part number?

    347151 superceded by EKC000030PMA 89p each plus the usual from LR Series (other suppliers are available) Paul
  11. V

    Fog light wiring cover, Part number ??

    Mudshileld rear lamp (rectangular flat plate) Like this Land rover rear lamp lense guard MTC7861 | eBay MTC7861 up chassis number HA704532 then BTR1790 to chassis number YA159848 then CLK00010 There is also a folded style plate MRC8094 Paul
  12. V

    Defender chassis loom front to rear 300tdi

    Same with my 300tdi 90 Ive just pulled mine through, go steady and thread the connectors through into the chassis, so you dont pull them off the ends of the wires.
  13. V

    Looking for door cards compatible with sliding window..

    Devon 4x4 do alloy ones - they aint cheap though......... D44 Aluminium Door Card Set - Plain Cheers Paul
  14. V

    defender grill

    I suppose they want to preserve the heritage of the heritage models..........
  15. V

    defender grill

    Thats the grille from the td5 heritage model - land rover are very touchy about who they sell them to and when I eventually bought one about 3 years ago it was about £130..........
  16. V

    paul darlows 100inch svx

    Far too blingy - a nice concept spoiled by extreme chav-ness - each to his own tho I suppose..................
  17. V

    Defender Headlight woes

    I had an issue with a blade type fuse once, the fuse was OK (not blown) but I eventually found after hours of fannying about one of the spade connectors that the fuse pushes into in the fuse box had pushed out of the back of the fuse box, stopping any power getting through......... Paul
  18. V

    90 hi cap?

    Heres a link with a few pics from e-by-gum bay of a 90 with drop side pick up arrangement................ Land Rover DEFENDER 90 300 TDI DROPSIDE PICKUP 1997 | eBay Paul
Back
Top