Search results

So I’ve had some time today to look at the car. Battery voltage with engine off was 12.45V Battery voltage with engine running was 14.12V I also checked the Ohms for the OBD2 port Pin 6 & 14 was 59.8 Ohms Pin 3 & 11 was 61.8 Ohms Do these figures look about right

thank you very much for all this info. I will test it all on my day off and will report back the values i get. As far as the suspension goes, i believe thats all sorted, i dont appear to have any leaks and it seems to be working as it should. Im using a icarsoft iid tool.

I haven’t checked the wiring under the battery, I will do this on my next day off. I have googled all the codes but with regards to the comms fault nothing specific comes up, I don’t want to be chasing my tail to find out that I’m not even looking in the right place. It’s just I’ve spent soo...

After more hours on the disco I’m still not having any joy. I replaced the pressure sensor and found one of the air lines was a bit clogged so I replaced that and also rebuilt all the valve blocks. I’m really at a loss at what to look for next, the codes I’m picking up now are diesel v6 P0402-...

Thanks for that, i will have a good look over the troubleshooting file you’ve sent over. I might just replace the pressure sensor aswell and see if this helps

Hi and thank you for the reply Its an 08 tdv6 diesel Is there a way of testing the pressure switch to find out if its faulty or would it be a case lf swapping it for a new one?

Hi all, new to the forum. Ive read countless threads but cant seem to get to the bottom of this issue im having. So i started to get christmas lights on the dash, dsc, epb, hdc and suspension faults, then the car goes into limp mode. I have a icarsoft iid tool and i get a lot of codes but most...